《PM Iron Core Brush Motor》.pdfVIP

NEW DESIGN PLATFORM FOR COMPARISON AND SELECTION OF MOTOR TECHNOLOGIES FOR HIGH PERFORMANCE MOTION SYSTEMS by Luciano ANTOGNINI,MouncifLAHLOU,Corporate Research,Portescap, Switzerland Prof. Liviu KREINDLER etalii, Polytechnic University of Bucharest, Romania Abstract:The large variety of motor technologies and corresponding control schemes available today to the design engineer and the dramatic pressure to reduce development time in industrial projects have created the need forperformant design tools which allow to realise, already at a level of preliminary simulation, the complete motion system. After a first review of the selectioncriterias and the characteristic offered by the different motor technologies, the paper will illustrate an original global approach, allowing to simulate, optimise and implement, with an adequate hardware , a complete motion systems. 1. Introduction All the different motor technologies do present obviously advantages and drawbacks. These The choice of the most adequate motor technology advantages and drawbacks are however relative, in the design of a high performance motion as they will be determinant only if they correspond system is a key issue as normally each to the specific needs of the application considered. application presents specific requirements. Our purpose at this stage is to review and However, besides the motor intrinsic compare the advantage and drawbacks of some characteristics, a multitude of other factors, such competitive technologies and to discuss some