《Release Letter》.pdfVIP

Security Systems From Telephone Nuremberg STDN/PRM Product Management +49 911 93456 0 23.11.2012 Release Letter H.264 Firmware for CPP-ENC Encoders: Products: VIP X1600 XFM4 VJT X20/X40 XF-E Version: 5.52.0015 This letter contains latest information about the above mentioned firmware version. 1 General CPP-ENC H.264 firmware version 5.52.0015 is a maintenance release based on the former release 5.52.0009 for the VJT X20/X40 XF-E encoders and VIP X1600 XFM4 modules but is not applicable to other VIPX platform products. The platforms have been renamed for a more generic recognition to “Common Product Platform”, short CPP, followed by the architecture-related number or suffix. CPP-ENC stands for “Common Product Platform for Encoders”. The filenames are adapted accordingly. Note: This is the final release for VIP X1600 XFM4 modules. No more releases are intended to be made for these modules. 1 BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany Security Systems From Telephone Nuremberg STDN/PRM Product Management +49 911 93456 0 23.11.2012 2 Changes ? Number of simultaneous RTSP connections increased from 10 to 25. ? Type naming of VIP-X1600-XFM4 modules has been corrected to ‘VIP-X1600-XFM4’. ? Bug fix for not saving DNS Server address in configuration when assigned via DHCP. 3 Restrictions; Known Issues ? Mixture between video standards, e.g. PAL encoder connected to NTSC decoder, is not supported. ? In QCIF resolution, stamping is not available. ? After firmware upload while daylight saving time checkbox is activated the time zone must be adjusted. ? When filling an empty DST table and then update time zone too quickly, it may happen that time is shifted by 1 hour. ? After reboot, the system time re-synchronisation may be delayed up to 9 seconds for SNTP respectively up to 14 seconds for time server protocol. ? Ethernet daisy-chaining of VIP-X1600-XFB is limited to 3 units. ? LUN size for local recording via “Dir