《Section Cover Page》.docVIP

Section Cover Page Section 22?42?00 2010-12-01 Plumbing Fixtures and Trim Refer to “LEED Notes and Credits” page for additional guidance for LEED projects. Delete LEED items if project: .1 is excluded by the Department’s policy on LEED, or .2 the Department has determined that the work of this Contract is not to attain a LEED rating. This Master Specification Section contains: .1 This Cover Sheet .2 Specification Section Text: 1. General 1.1 Reference Documents 1.2 Product Options and Substitutions 1.3 Regulatory Requirements 1.4 Certifications 1.5 Source of Supply 1.6 Coordination 1.7 LEED Requirements 2. Products 2.1 Fixture Brass and Accessories 2.2 Water Closet – Siphon Action, with Flush Valve 2.3 Water Closet – Siphon Action, with Flush Tank 2.4 Water Closet – Reverse Trap, Floor Mount 2.5 Urinal 2.6 Lavatories 2.7 Stainless Steel Sinks 2.8 Bathtub and Shower 2.9 Cabinet Shower 2.10 Institutional Showers 2.11 Drinking Fountain 2.12 Wash Fountains 2.13 Service or Mop Sinks 2.14 Thermostatic Mixing Valve 3. Execution 3.1 Installation 3.2 Protection 3.3 Fixtures RoughIn Schedule LEED Notes: Refer to Section 01 35 18 – LEED Requirements for: .1 Requirements necessary for this project to obtain points required for certification. .2 Confirmation of LEED prerequisites and credits affecting this Section; not all are mandatory for certification Maintain built-in sustainability regardless of LEED requirements for: .1 Recycling, reuse of materials, components and assemblies. .2 Diversion of construction waste from landfills. .3 Use of recycled materials, local materials, rapidly renewable and durable materials. .4 Maintain healthy indoor environment during constructing. .5 Provide for thermal comfort, access to views and daylight for indoor spaces. .6 Foster innovation into facility design and planning. LEED Credits: Water Efficiency Prerequisite 1 – Water Use Reduction, 20% Reduction SPEC NOTE:??Though prerequisites do not contribute to a projects point score,