《Series CCP-33S》.pdfVIP

Series CCP-33S COAX SWITCHES Low PIM, Miniature DC–3 GHz Latching SPDT Coaxial Switch PART NUMBER DESCRIPTION CCP-33S Commercial Latching SPDT, DC-3 GHz These switches are classi? ed to have extremely low passive intermodulation for use in narrow bandwidth communications applications. The CCP-33S is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The small switches incorporate SMA connectors. The CCP-33S series switch is offered with a latching actuator. This design is compatible with the two most common mounting hole patterns. The CCP-33S series switch is interchangeable with a variety of switches. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature –40°C to 65°C Form Factor SPDT, break before make Vibration MIL-STD-202 Method 214, 10 g’s RMS Condition D, non-operating Frequency Range DC–3 GHz Shock MIL-STD-202 Method 213, 500 g’s Characteristic Impedance 50 Ohms Condition D, non-operating Switching Time 10 ms max. Standard Actuator Life 1,000,000 cycles Actuation Voltage Available 12 15 24 28 V Connector Type SMA Actuation Current, max. @ ambient 140 170 90 65 mA Humidity Moisture Seal Available Weight 1.65 oz. 46.78g max. PERFORMANCE CHARACTERISTICS PASSIVE INTERMODULATION CHARACTERISTICS Frequency DC–3 GHz Tone 1 Frequency Tone 2 Frequency IM3 Frequency PIM Threshold MHz MHz MHz dBc Insertion Loss, dB, max. 0.2 1945 1990 1900 -140.0 Isolation, dB, min. 90 VSWR , max. 1.25:1 P1 P2 dBm PIM dBc PEAK PIM dBc RF Power cw , W, max 75W @3GHz 43 -143.1 -142.2 PART NUMBERING SYSTEM CCP-33 S 6 C - T ** Series Options Connectors Actuator Type Actuator Voltage Connector Actuator Voltage Actuator Type Options S: SMA Female 6: 28 Vdc Latching 0: Standard Contacts T: TTL Drivers with Diodes 7: 15 Vdc Latching C: Indicator Contacts D: Transient Suppression 8: 12 Vdc Latc