g公司磁路组合水线流程改进研究毕业论文.docVIP

本科毕业论文 题 目：G公司磁路组合流水线流程改进研究 目 录 摘 要 III ABSTRACT IV 1 前 言 - 1 - 1.1 课题背景 - 1 - 1.2 研究意义 - 1 - 1.3 研究思路 - 2 - 2 流程改进相关技术 - 4 - 2.1 流程概述 - 4 - 2.2 工作研究 - 4 - 2.3 程序分析 - 5 - 2.4 作业分析 - 7 - 2.5 模特排时法 - 8 - 3 G公司MSA流水线生产现状及问题分析 - 9 - 3.1 研究对象概述 - 9 - 3.1.1 G公司简介 - 9 - 3.1.2 G公司产品简介 - 9 - 3.2 MSA流水线生产流程概述 - 10 - 3.2.1 流水线整体工位布局 - 10 - 3.2.2 流水线具体工位作业 - 12 - 3.3 MSA流水线生产流程问题分析 - 15 - 4 MSA生产流水线流程改进研究 - 17 - 4.1 工艺程序研究 - 17 - 4.2 流程程序分析与改进 - 18 - 4.3 充磁工位作业分析与改进 - 22 - 4.4 点胶工位动作分析与改进 - 24 - 4.5 工装分析与改进研究 - 26 - 4.6 流程改进效果评价 - 29 - 5 结 论 - 30 - 谢 辞 - 31 - 参考文献 - 32 - 摘 要 生产流程是现代企业提高竞争能力的重要途径Process Improvement Research about the magnet system assembly line in G company ABSTRACT Production process improvement is an important way to improve the modern enterprise competitiveness. Taking full account of the production area, working environment and manufacturing processes, through a range of analysis and research, specific process improvement is the process of finding the unreasonable existence, using relevant professional analysis technology, proposing a solution and needing practice test. The pipeline improvements could substantially improve the production efficiency and have a great significance in production and development of enterprises. In the background of further development of Chinas electronic industry, with the manufacturing process of miniature loudspeaker in G company for research object, this article proposes the technologies in related of industrial engineering in process improvement, researches and improvements of the Magnet System Assembly. First of all, through process and procedure analysis of the whole flow line, this article tries to re-adjust the old layout and arrange the new one in the pipeline processes. And then this article carries out job analysis of the unreasonable position for individual work on the line, in order to improve the job of magnetizing position and dispensing station. Finally, this article analyzes and improves the tools-frock