150吨转炉倾动机构设计（全套含CAD图纸）.doc

买文档后送图纸，QQ 194535455 150吨转炉倾动机构设计 摘 要 转炉设备中，倾动机械是实现转炉炼钢生产的关键设备之一，炉体的工作对象是高温的液体金属，在兑铁水、出钢等项操作时，要求炉体能平稳地倾动和准确的停位。为获得如此低的转速，需要很大的减速比。转炉炉体自重很大，再加装料重量等，整个被倾转部分的重量要达上百吨或上千吨。转炉倾动机械的工作属于“启动工作制”。机构除承受基本静载荷作用外，还要承受由于启动、制动等引起的动载荷。这种动载荷在炉口刮渣操作时，其数值甚至达到静载荷的两倍以上。转炉倾动机械随着氧气转炉炼钢生产的普及和发展也在不断的发展和完善，出现了各种型式的倾动装置。本设计为带有扭力杆缓冲止动装置的全悬挂式倾动机械，扭力杆可以缓冲转炉倾动时产生的载荷和冲击，而且对耳轴不产生轴向力。本设计的主传动系统为四个对角线布置的一次减速机带动一个位于其中心的二次减速机，从而带动整个转炉进行回转工作。每一台一次减速机的输入轴由一个直流驱动电动机带动工作，四台一次减速机借助其法兰盘凸缘固定在二次减速机的外壳上，在其输出轴上安装的小齿轮与安装在耳轴上的悬挂大齿轮相啮合，组成二次减速机。 关键词：转炉，倾动机械，倾动装置 150 t converter tilting mechanism design Abstract Converter device, tilting mechanical equipment is one of the key steelmaking production , furnace work object is a liquid metal temperatures in hot metal , other items when tapping operation , requiring tilting furnace can smoothly and accurately stop bit . To obtain such a low speed, requires a large reduction ratio. Great weight converter furnace , plus loading weight, etc. , the entire weight of the part to be tilting up hundreds of tons or thousands of tons . Converter tilting mechanical work belongs to start working system . In addition to the basic institutions to withstand static loads , but also to withstand dynamic loads due to start , braking caused . This dynamic load in the mouth skimming operation, more than twice its value even to static loads. With the converter tilting BOF steelmaking machinery popularization and development also continues to develop and improve , there have been various types of tilting the device . The torsion bar is designed with a full buffer stopper suspended mechanical tilting torsion bar and can buffer the impact load generated when the converter is tilted , and the axial force is not generated trunnion . The design of the main drive system is arranged in a four diagonal reducer drive one at the center of the second gear , so as to drive the rotary converter work performed . Each one gear input shaft driven by an electric motor driven by a DC to work four first g