基于图元三维离散元法边界建模方法.pdfVIP

14 12 计算机集成制造系统 Vol. 14 No. 12 2 0 0 8 12 Computer Integrated Manufacturing Systems Dec. 20 0 8 : 100 - 5911( 2008) 12- 2328- 0 1 1 2 3 , , , ( 1. , 130012; 2. , 130012; 3. , 130025) : ( ) , , , , , , : ; ; ; ; / :T P391 :A Method for modeling boundaries based on the graphic elements in the three-dimensional DEM 1 1 2 3 F UH ong , W U L an , H UA N G Wan-f eng , Y U J ian-qun ( 1. College of Com puter Science Technology , Jilin Universit y, Changchun 130012, China; 2. M athematics School, Jilin University, Changchun 130012, China; 3. School of Biological Agricultural Engineering, Jilin U niversit y, Changchun 130025, China) Abstract: To establish the analysis model of boundaries from their three-dimensional Computer Aided Design ( CAD) model in the three-dimensional Discrete Element Method ( DEM) , a novel method for modeling boundaries based on the graphic el- ements and concepts of rea-l boundary and virtua-l boundary graphic elements were put forward. Based on these, the algo- rithms for contact detection, the calculation for contact points and the contact overlap of sphere particles and the three- di- mensional graphic elements were established, the graphic elements including the surface of circle flat, cone and cylinder, etc. , over twenty kinds of the graphic elements were also advanced. By several application examples, correctness and effec- tiveness of the pro