characterization of limxfe1#226; xpo4 (strongmstrong = mg, zr, ti) cathode.pdfVIP

University of Wollongong Research Online Faculty of Engineering - Papers (Archive) Faculty of Engineering and Information Sciences 2004 Characterization of LiMxFe1–xPO4 (M = Mg, Zr, Ti) Cathode Materials Prepared by the Sol-Gel Method G. X. Wang University of Wollongo ng, gwang@.au S. Bewlay University of Wollongo ng J . Yao University of Wollongo ng, jyao@.au J . H. Ahn University of Wollongo ng S. X. Dou University of Wollongo ng, shi@.au See next page for additional authors .au/engpapers/128 Publication Details This article was originally published as Wang, GX, Bewlay, S, Yao J et al, Characterization of LiMxFe1–xPO4 (M = Mg, Zr, Ti) Cathode Materials Prepared by the Sol-Gel Method, Electrochemical and Solid-State Letters, 7(12), 2004, A503-A506. Copyright The Electrochemical Society. Original journal available here. Research Online is the open access institutional repository for the University of Wollongong. For further information contact the U W Library: research-pubs@.au Authors G. X. Wang, S. Bewlay, J. Yao, J. H. Ahn, S. X. Dou, and Hua Liu This journal article is available at Research Online: .au/engpapers/128 Electrochemical and Solid-State Letters, 7 12 A503-A506 2004 A503 1099-0062/2004/712/A503/4/$7.00 © The Electrochemical Society, Inc. Characterization of LiM Fe PO MMg, Zr, Ti Cathode x 1 x 4 Materials Prepared by the Sol-Gel Method