sd4008_语音ic.docVIP

Sound Electronics OTP Series SD4008 Description SD4008 is a 40” PWM or DAC voice output with high quality speech ,2 input pin and 6 I/O pin simple speech. Functions MAX voice file : 700 MAX Groups : 64 MAX Step : 700 Signal step mute length : 0.64 s ( 6k sampling rate ) Operating Voltage range: 2.4V ~ 5V Total Voice Duration : 40” (6K Sampling rate) Input pin : 2 I/O pin : 6 Voice output : PWM and DAC Sequential Key : TG1 - 32 Groups. TG2 - 21 Groups. TG5~TG12- 1 Group Debounce time : 50 us or 10 ms On/Off function : only for TG1 TG2 Trigger mode (for all Input pins) : Edge/Level Hold/Unhold Retrigger/Irretrigger Output status (for each Output pin): Stand by Status. Busy Low Active. Busy High Active. LED Flash at 6 Hz. LED Flash at 3 Hz. Sound Electronics OTP Series SD4008 Play rate level : SD4008 can provide different play rate in one code as follow Play rate(K) Play rate(K) 3 6 3.097 6.4 3.2 6.857 3.31 7.385 3.429 8 3.556 8.727 3.692 9.6 3.84 10.667 4 12 4.174 13.714 4.364 16 4.8 19.2 5.053 24 5.33 5.647 Sound Electronics OTP Series SD4008 SD4008 Pad Location CHIP SIZE: (0, 0) (1730,1196) UM The IC substrate should be connect to vss SD4008 DC character Item Symbol Min Typ Max Unit Condition Operating voltage VDD 2.4 3.0 5 V Standby current Isb 1 5 uA VDD=3V,no load Operating current Iop 600 uA VDD=3V,no load 1 mA VDD=4.5V,no load Drive current of O Iod 5 mA VDD=3V Sink current of O Ios 10 mA VDD=3V Drive current of PWM Iod 200 mA VDD=3V,VOUT=1.5V Sink current of PWM Ios 200 mA VDD=3V,VOUT=1.5V Sound Electronics OTP Series SD4008 SD4008 Application Circuit System Power 2.4~3.6V PWM1 PWM2 directly drive Speaker System Power 2.4~5V PWM1 PWM2 directly drive Speaker System Power 2.4~3.6V DAC Output , Connected with 8050 Resistor driving Speaker Sound Electronics OTP Series SD4008 SD4008 Package Information SD040-S08A PIN NAME 1 TG2 2 TG1 3 TG5 4 VSS 5 PWM2/DAC 6 PWM1 7