摩擦焊接用电磁振动头的仿真分析与实验研究.pdfVIP

27 卷 12 期 中 国 电 机 工 程 学 报 Vol.27 No.12 Apr. 2007 2007 年4 月 Proceedings of the CSEE 2007 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2007) 12-0086-05 中图分类号：TM574；TM359 文献标识码：A 学科分类号：47040 摩擦焊接用电磁振动头的仿真分析与实验研究 勇, 崔 友, 张晓俊, 陆永平 (哈尔滨工业大学，黑龙江省 哈尔滨市 150001) Research on Simulation and Experiments of Electromagnetic Vibrating Head Used for Vibration Welding LI Yong, CUI You, ZHANG Xiao-jun, LU Yong-ping (Harbin Institute of Technology, Harbin 150001, Heilongji ang Province, China) ABSTRACT ：Vibration welding is a new type advanced 0 引言 technology used in apertureless welding which is focused on in 振动摩擦焊接是一种利用电磁传动装置在两热 recent years. On the basis of design of a new type bilateral 塑性塑料零件之间产生相对运动，进而摩擦生热形 excitation electromagnetic vibrating head, a simplified mathematic model was set up through predigesting 成接头的焊接方法。振动摩擦焊速度较快，能用于 electromagnetic field to electromagnetic route method, and 焊接各式各样的热塑性塑料，尤其广泛用于汽车行 motion function of the system was also obtained based on 业和家用电器行业。采用振动摩擦焊接的两塑料零 variational theory and non-conservative system Lagrange 件结合面在熔接设备作用下自动对齐，在压力作用 function. Dynamic characteristics of the head were analyzed in 下形成牢固的焊接接头，其接头强度可 到母材自 Simulink, where influences of gap variation to winding 身强度。与其他焊接技术相比，该种焊接技术不需 inductance and amplitude of the force were taken into account. 要另加焊料，而且利用了材料本身的物理特性，因 Simulation results of winding