新型Buck逆变器3阶滑模控制策略.pdfVIP

第 29 卷 第 12 期 中 国 电 机 工 程 学 报 Vol.29 No.12 Apr. 25, 2009 2009 年 4 月 25 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 41 文章编号：0258-8013 (2009) 12-0041-06 中图分类号：TM 464 文献标志码：A 学科分类号：470·40 新型 Buck 逆变器 3 阶滑模控制策略 许飞，马皓，何湘宁 (浙江大学电气工程学院，浙江省 杭州市 310027) Novel Three-order Sliding Mode Control Strategy for Buck Inverter XU Fei, MA Hao, HE Xiang-ning (College of Electrical Engineering, Zhejiang University, Hangzhou 310027, Zhejiang Province, China) ABSTRACT: In order to increase the precision, a novel 半桥式和全桥式等电路拓扑。近来，基于新概念的 third-order sliding mode control strategy was proposed for the DC/AC逆变器的新颖拓扑越来越引起关注[1-4] 。由两 Buck DC/AC inverter composed of two symmetrical current 组相同对称的双向Buck变换器组成的DC/AC逆变 bi-directional Buck converters. Base on the equivalent circuit 器拓扑是一种新颖特殊的逆变器拓扑，它不仅具有 of Buck inverter, the analysis and design of the third-order Buck变换器的优点，而且可以实现高精度开关功率 sliding mode controller was done according to Lie derivative 放大器等实际应用[1,5] 。一些应用场合的功率放大器 method. The selection method of the sliding surface coefficients was given. To simplify the analysis, three- 的应用输出特性要求尽可能高的稳态精度，同时对 dimensional trajectory was transformed into two-dimensional 于负载变化具有优良的瞬态响应。 one through mapping transformation. The sliding domain and 相对于传统的PID控制等线性控制策略，作为 sliding motion were described by phase trajectory. 非线性控制方法的滑模变结构控制具有对参变量 Experimental results show the proposed control strategy can 和外界干扰的鲁棒性，良好的动态和稳态响应等特 improve the steady performance of the system and has good 点[6-9] 。并且，从逆变器本身的开