中速磨煤机的石子煤特性研究.pdfVIP

第30 卷 第23 期 中 国 电 机 工 程 学 报 Vol.30 No.23 Aug.15, 2010 2010 年8 月15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 67 0258-8013 (2010) 23-0067-06 TK 223 A 470 10 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 中速磨煤机的石子煤特性研究 朱宪然，赵振宁，张清峰 (华北电力科学研究院有限责任公司，北京市 西城区 100045) Research on Pulverizer Rejects Characteristics for Medium Speed Mill ZHU Xian-ran, ZHAO Zhen-ning, ZHANG Qing-feng (North China Electric Power Research Institute Co., Ltd., Xicheng Distrct, Beijing 100045, China) ABSTRACT: The characteristics of pulverizer rejects such as 0 引言 density, calorific values and ash component were tested in the 受到经济性和安全性的影响，石子煤排量一直 laboratory for the ZGM95 medium speed mill, which indicates 是困扰我国采用中速磨煤机直吹式制粉系统电厂 that the apparent and inherent characters of pulverizer rejects 的一个问题[1] 。首先，由于我国电厂实际燃用的煤 are quite different under different working conditions. The 种多变且与设计煤种有较大区别，石子煤的成分千 inner flow fields in the medium speed mill were numerically simulated by employing the commercial code of FLUENT. The 差万别，且其排放过多或过少往往引起磨煤机着火 results show that the static pressure and the flow rate at each 或严重磨损等问题[2-3] 。其次，虽然我国电厂开展了 nozzle ring are different from those of others due to the 许多针对中速磨煤机喷嘴环的改造[4-7]，但是由于现 primary air entering the mill only from one side. The 有技术手段尚无法实现磨煤机内流场尤其是喷嘴 simulation validates that the air velocity at the nozzle ring is 环处流场的测量，因此这些改造往往只依靠