基于云模型的球磨机料位概念表示和测量模型.pdfVIP

第34 卷 第14 期 中 国 电 机 工 程 学 报 Vol.34 No.14 May 15, 2014 2014 年5 月15 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. 2281 DOI ：10.13334/j.0258-8013.pcsee.2014.14.009 文章编号：0258-8013 (2014) 14-2281-08 中图分类号：TP 212 基于云模型的球磨机料位概念表示与测量模型 阎高伟，龚杏雄，续欣莹，韩晓明 (太原理工大学信息工程学院，山西省 太原市 030024) Conceptual Representation and Measurement Model of Ball Mill Fill Level Based on Cloud Model YAN Gaowei, GONG Xingxiong, XU Xinying, HAN Xiaoming (College of Information Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi Province, China) ABSTRACT: Aiming at the existence of uncertainty factors 0 引言 like randomness in the process of measuring fill level (FL) of 滚筒式球磨机广泛应用于电力、矿山、冶金、 ball mill by analyzing acoustic signals, cloud model system was utilized to represent the FL concepts, meanwhile, the 化工和建材等行业。但滚筒式球磨机所消耗的大部 uncertainty reasoning model was built to measure FL of ball 分电能属于自身消耗，是一种高能耗的设备。根据 mill. The features were extracted from the preprocessed data. 试验研究，球磨机都有至少 10％的节能潜力，准确 Then the backward cloud generator was employed to generate 测量滚筒式球磨机的料位，并进行有效控制是节能 the basic FL concepts and build the antecedent clouds by 关键。球磨机工作在旋转状态下，由于缺少直接检 synthesizing the basic FL concepts. Simultaneously, the consequent clouds were built by FL values. Thus the cloud 测内部料位的设备，经常发生饱磨、空磨和堵磨等 reasoning rule base was established. At last, FL soft 现象，不得不经常停料或停磨，造成生产效率降低， measurement of ball mill was realized by cloud model 还影响产量和质量的提高。因此，可靠测量滚筒式 reasoning. The comparative experiments have p