考虑设计相关载荷的稳态热传导拓扑优化设计.pdfVIP

第32 卷第5 期 Vol.32 No.5 工 程 力 学 2015 年 5 月 May 2015 ENGINEERING MECHANICS 1 文章编号：1000-4750(2015)05-0001-05 考虑设计相关载荷的稳态热传导拓扑优化设计 1 1 2 鲁英春 ，李 敏 ，刘远东 (1. 四川绵阳师范学院数学与计算机学院，四川，绵阳 621000 ；2. 中国工程物理研究院总体工程研究所，四川，绵阳 621900) 摘 要：针对稳态热传导问题，以结构散热弱度最小为目标，建立了连续体传热结构的拓扑优化模型和方法，给 出了相应的算例。优化方法中分别建立了设计相关载荷和非相关载荷的灵敏度列式，采用Rational Approximation of Material Properties (RAMP)方法对材料密度进行惩罚，利用优化准则法控制设计目标与材料分布，以敏度过滤 技术抑制棋盘格效应。算例的结果直观显示了设计相关载荷和非设计相关载荷以及复合载荷对结构拓扑构型的影 响规律，表明了该文考虑设计相关载荷的稳态热传导结构拓扑优化方法的合理性。 关键词：稳态热传导；拓扑优化；散热弱度；敏度分析；设计相关载荷 中图分类号：TH122 文献标志码：A doi: 10.6052/j.issn.1000-4750.2013.11.1014 TOPOLOGY OPTIMIZATION OF STEADY HEAT CONDUCTIVE STRUCTURES WITH DESIGN-DEPENDENT HEAT LOADS 1 1 2 LU Ying-chun , LI Min , LIU Yuan-dong (1. College of Mathematics and Computer Science, Mianyang Normal University, Mianyang, Sichuan 621900, China; 2. Institute of Systems Engineering, CAEP, Mianyang, Sichuan 621900, China) Abstract: With the minimum dissipation of heat transport potential capacity as the objective, a topology optimization model and related method for heat conduction continuum structures were developed to solve steady heat conduction problems, and related numerical experiments were carried out. In the method, the sensitivity formulae of both design-dependent and design-independent loads are given, Rational Approximation of Material Properties (RAMP) is adopted to ensure clear topologies, the design objective and material distribution are controlled using the optim