鹤岗益新双斜井煤矿井田设计设计说明书解读.doc

摘 要 本设计矿井为清水营二矿1.2Mt/a新井设计。 本矿区内有四层可采煤层，分别为3#、8#、12#、14#均为全区可采，平均总厚度10.4m。井田走向长度4200m,倾向长度2900m,煤层平均倾角13°,视密度1.35g/cm3,煤层工业牌号为焦煤，矿井涌水量一般为,880m3/h，最小涌水量850m3/h，最大涌水量为920m3/h,设计井田的工业储量为323.73Mt,设计可采储量为190.67Mt，服务年限为76a，本矿井设计采用双斜井方案开拓，划分两个水平，六个采区，一水平可回采三个采区，中一、右一、左一采区，采用集中上山布置，走向长壁后退式采煤法采煤，综合机械化回采工艺。矿井的年工作日为330d，采用“四、六”工作制，净提升时间为16h。矿井的主斜井采用波纹挡边胶带输送机提升，副斜井采用串车提升,大巷采用14t架线式电机车牵引3t底卸式矿车运输。通风方式为对角式通风。 关键词：双斜井 可采储量 分区对角式 走向长壁后退式 Abstract The design of the mine is about the Yixin mines belonging Hegang Mining Group 1.8Mt / a new mine design. The mine has eight mineable coal seams, namely 3 #, 5 #, 7 #, 8 #, 11 #, 12 #, 13 #, 15 # are not region can be taken, the average total thickness of 20m. Strike length of 5300m, tendencies length 1900m, average coal seam dip angle 20 °, depending on the density 1.35g/cm3, industrial grades of coking coal, mine water inflow is generally 200m3 / h, the maximum water inflow to 250m3 / h, designed for industrial reserves of Ida 323.73Mt, recoverable reserves 190.67Mt, service life of 76a, the design uses a pair of inclined mine plan development, dividing two levels, six mining area,the first level The first level is divided into three mining areas, the first mining area, located in the middle one,the right one, the left one, the use of concentrated mountain layout, retreating longwall coal mining method, mechanized mining technique. Mine was working for the 330d, the use of four-six work system, a net rise time is 16h. Mines main shaft using corrugated sidewall conveyor belt promotion, auxiliary shaft using string car upgrade, roadway using 14t overhead line electric locomotive traction 3t hopper tramcar transport. Ventilation is a diagonal ventilation. Keywords: Two inclined Recoverable reserves Diagonal partition Retreating longwall mining method  目 录 摘 要 I Abstract II 目 录 III 第1章 井田概况及矿井建设条件 1.1 井田概况 1 1.1.1 交通位置 1 1.1.2 地形地貌 1 1.1.3 地面水系 2 1.1.4 气象特征 2 1.1.5 地震情况 2 1.1.6 地区经济概况 3 1.1.7 矿区开发简史 3 1.2 矿井外部建设条件及