锌电解全流程酸锌离子浓度在线预测模型.pdfVIP

第 66 卷 第 7 期 化 工 学 报 Vol.66 No.7 2015 年 7 月 CIESC Journal July 2015 锌电解全流程酸锌离子浓度在线预测模型 邓仕钧，阳春华，李勇刚，朱红求 （中南大学信息科学与工程学院，湖南长沙 410083 ） 摘要：针对电解液中酸锌离子浓度离线化验存在大滞后，难以实现锌电解过程在线优化控制的问题，研究了锌电 解全流程酸锌离子浓度在线预测模型。在分析锌电解过程电化学反应机理的基础上，结合锌电解过程物料平衡， 建立了锌电解动态反应模型。基于锌电解工业现场数据，采用 FCM 算法对锌电解工况进行分类，并辨识了不同 工况条件下预测模型的参数，利用多工况模糊匹配实现了全流程酸锌离子的预测。工业数据验证结果表明所建模 型能有效地反映酸锌离子浓度的变化趋势，为锌电解过程的优化控制奠定了基础。 关键词：锌电解；酸锌离子浓度；工况分类；参数辨识 DOI ：10.11949/j.issn.0438-1157 中图分类号：TP 11 文献标志码：A 文章编号：0438—1157 （2015 ）07—2588—07 On-line prediction model for concentrations of zinc ion and sulfuric acid in zinc electrowinning process DENG Shijun, YANG Chunhua, LI Yonggang, ZHU Hongqiu (School of Information Science and Engineering, Central South University, Changsha 410083, Hunan, China) Abstract: The concentrations of zinc ion and sulfuric acid in electrolytic solution are detected by off-line analysis with large time-delay, which will be detrimental to the on-line optimal control for zinc electrowinning process (ZEWP). It is very significant to predict the concentrations of zinc ion and sulfuric acid on line. The electrochemical reaction mechanism for ZEWP is analyzed, and a dynamic model for ZEWP is established based on the material balance and electrochemical equations. Based on the data collected from the practical ZEWP, the working conditions of the ZEWP are classified using FCM algorithm. The parameters of the dynamic model under different classes