3电快速瞬变脉冲群抗扰度试验发生器建模.pdfVIP

第 30 卷 第 6 期 中 国 电 机 工 程 学 报 Vol.30 No.6 Feb.25, 2010 2010 年 2 月 25 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 123 文章编号：0258-8013 (2010) 06-0123-06 中图分类号：TM 93 文献标志码：A 学科分类号：470·40 电快速瞬变脉冲群抗扰度试验发生器的建模 翟小社，耿英三，王建华，宋政湘，张国钢 ( 电力设备电力绝缘国家重点实验室(西安交通大学) ，陕西省 西安市 710049) Modeling of Pulse Generator in Electrical Fast Transient/Burst Test ZHAI Xiao-she, GENG Ying-san, WANG Jian-hua, SONG Zheng-xiang, ZHANG Guo-gang (State Key Laboratory of Electrical Insulation and Power Equipment (Xi’an Jiaotong University), Xi’an 710049, Shaanxi Province, China) ABSTRACT: In order to predict the susceptibility of 据仪器厂商的校准波形加以确定；其次，基于该解析式并采 equipment under electrical fast transient/burst (EFT/B) test 用阶跃函数激励，得到脉冲形成网络的传递函数，并分别采 during its early design stage, it is essential to set up the 用恒电阻法及参数化电网络综合法得到脉冲形成网络的等 equivalent circuit of the EFT/B generator and its 效电路；最后，对等效电路各元件参数进行归一化处理，并 coupling/decoupling network. In order to fit the revised edition 根据发生器在匹配条件下(50 Ω) 的校准波形确定归一化系 of IEC standard, a systematic method was presented to model 数。将 EFT/B 发生器的等效电路模型与标准容性耦合夹电 the equivalent circuit of EFT/B pulse generator. Firstly, an 路模型进行连接仿真，通过仿真与测量结果的对照验证了所 analytical expression was presented to express the generator’s 提方法的合理性。 charging and discharging process under open-condition (1 kΩ), which all coefficients could be determined according to the 关键词：电快速瞬变脉冲群；等效电路；解析表达式；网络 output waveform specified by the manufacturer. Secondly, with 综合 adoption of the step source, the transfer function of the pulse 0 引言 forming network in Laplace domain was deduced, which was ready for the network synthesis. Based on above discussion, the 在现代电子设计中，对设计对象进行电快速瞬 parame