连铸坯质量控制零缺陷战略_蔡开科.pdfVIP

DOI:10.13228/j.boyuan.issn1005-4006.2011.s1.034 2011 年 9 月 连 铸 增刊 连铸坯质量控制零缺陷战略 1 1 2 蔡开科 ， 孙彦辉 ， 韩传基 (1. 北京科技大学冶金与生态工程学院，北京 100083 ； 2. 中冶连铸北京冶金技术研究院，北京 100081) 摘 要：为满足用户对产品质量越来越严格要求，生产价格便宜高质量产品是人们追求目标。而轧制产品质量是 与连铸坯缺陷紧密相联系的。本文系统地分析了在连铸过程中铸坯的表面缺陷、内部缺陷以及铸坯夹杂物产生的 原因，提出了防止铸坯缺陷产生应采取的措施，进一步提高铸坯质量。 关键词：连铸坯；质量控制 The “Zero Defect” Philosophy of Controlling Strand Quality for Steel Continuous Casting 1 1 2 CAI Kai-ke , SUN Yan-hui , HAN Chuan-ji (1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing，Beijing100083， China；2. Zhongye Research Institute Beijing，Beijing100081，China) Abstract:With growing demands of steel quality, steel users expects as defect-free a product as possible to permit safe and reliable service, and more economic advantage. It is implicitly expected that all quality of rolling steel product such as bar, wire (rod), hot and cold strip can with a high probability be associated with the defects of strand during continuous casting. This paper briefly summarizes the formation of surface and interior defects and non-metallic inclusions of strand during continuous casting process of steel. The main technological measures to reach the aim of “Zero defect ” for casting strand are examined as well. Key words: continuous casting strand; quality controlling 为满足用户对产品质量越来越严格要求，生产 个系统工程，它决定于钢的制造、初炼、精炼、钢