IGBT直接高压变频器在煤矿主井皮带机中应用设计.docVIP

IGBT直接高压变频器在煤矿主井皮带机中的应用设计 摘要 近几年随着电子技术、微电子技术、控制技术和网络化技术的高速发展，交流变频调速技术也迅速提高，其性能胜过其他任何一种交流调速(如降压调速、滑差调速、液力偶合器等)方式，且结构简单，稳定可靠，调速范围广，节能显著。尤其是最近高压变频器的飞速发展，让高压电机高性能地调速变为现实。 本课题设计的主要内容是以马脊梁矿煤矿主井皮带机上高压变频器调速的成功应用为设计背景，了解煤矿主井皮带机系统的工作原理，分析煤矿主井皮带机调速系统主电路，设计出以IGBT为主控器件的二电平主电路。并对主电路中的IGBT器件进行参数设计与选择，同时还包括IGBT器件的驱动电路和保护电路的设计。 煤矿主井皮带机调速系统是将功率器件IGBT应用到高压变频器里，IGBT直接串联高压变频器的灵活应用，成为煤矿主井皮带机实现稳产、高产的基础。 关键词：煤矿主井皮带机 变频器 IGBT 驱动芯片 ABSTRACT In recent years, as electronic technology, microelectronic technology, control technology and the rapid development of network technology, the rapid development of AC frequency control technology, its performance is better than any other form of communication speed (such as step-down speed, slip speed, fluid coupling, etc.) methods, and the structure is simple, reliable, wide speed range, significant energy saving. In particular, the recent rapid development of high-voltage converter, so that high speed motors for high performance to become a reality. The main content of the topic design is Majiliang Mine main shaft belt speed on the successful application of high voltage inverter for the design of the background to understand the main shaft of the working principle of belt conveyor system, belt conveyor of main shaft speed control system main circuit , IGBT-based controller designed to level the two pieces of the main circuit. The main circuit and IGBT device design and choice of parameters, the device also includes IGBT drive circuit and protection circuit design. Main Shaft Belt Drive System is applied to the IGBT power devices in high-voltage converter, IGBT inverter directly to the flexible application of high pressure series, a main shaft belt to achieve stable and productive basis. Key words: The mines main shaft driving belt conveyor； inverter；IGBT；Drive chip 目录 摘要 I ABSTRACT III 1 绪论 1 1.1 课题背景 1 1.2 课题的目的及意义 1 1.3 国内外分析研究现状 2 1.4 课题研究设计的主要内容 3 2 煤矿主井皮带机的工艺过程分析 5 2.1 煤矿主井皮带机的形式及工作过程 5 2.2 煤矿主井皮带机的工艺要求 6 2.3变频器在主井皮带机上的应用特点 7 3 IGBT在主井煤矿皮带机调速上