空分设备中安装管道焊接分析.docVIP

  • 6
  • 0
  • 约3.88千字
  • 约 5页
  • 2016-04-11 发布于重庆
  • 举报
空分设备中安装管道焊接分析

空分设备中安装管道焊接分析 张 庆 生 (开封东京空分集团有限公司,河南省开封市北关街8号 475001) 摘要:在空分设备的管道安装中,发现安装后的管道上焊缝的热影响区出现裂纹,通过采取了1、重新安装管道消除内应力2、采用改变振动的频率,来消除共振现象3、重新编制焊接工艺,减小焊接电流的措施,消除了管道裂纹。 关键词:管道裂纹;共振现象;焊接记录 Empty the cent installs piping to weld analysis in the equipments Zhang Qing?sheng (Kaifeng Dongjing Air Separation Group Co., Ltd., 8# Beiguan Street, Kaifeng 475001, Henan, P. R. China) Abstract: In emptily the cent the equipments of the piping the gearing, the detection installs an empress of piping the top weld sew of hot influence the area appear crack, passing to adopt 1,re- install the piping cancellation inte

文档评论(0)

1亿VIP精品文档

相关文档