数显串联可调式直流稳压电源的设计教程分析.docVIP

南 京 理 工 大 学 毕业设计说明书(论文) 作 者: 刘洋 准考证号：064912203065 教学点: 南通职业大学 专 业: 电子工程 题 目: 数显串联可调式直流稳压电源的设计 指导者： (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2014 年 5 月 毕业设计说明书（论文）中文摘要  众所周知许多科学实验都离不开电源，并且在这些实验中经常会对电压高低、电流大小以及动态指标有着特殊的要求,输出5V～20V之间连续可调的直流稳定电压，且输出纹波小于10mV。当电路过载或短路时，保护电路工作实现保护，同时报警电路中LED灯不停闪烁以示警告；当过载或短路故障排除后，只要按一下复位按钮，使可控硅“复位”，稳压电路便可正常工作。正常状态下显示模块中数码管实时显示输出电压大小。 关键词 直流稳压电源 可调 保护电路 毕业设计说明书（论文）外文摘要 Title The design of adjustable DC regulated power supply digital series Abstract As everyone knows, many scientific experiments cannot do without power, and often have special requirements on the voltage, current and dynamic index in these experiments. Most electronic devices require DC power supply, in addition to a small number of the dry battery or DC generator power supply directly, more occasions, is that the DC regulated power supply changes AC to dc. This topic is the design of a 5 ~ 20V continuously adjustable DC regulated power supply, voltage output voltage display and can be accurate and stable, the circuit realizes the function of overload and short circuit protection, which can further protect circuit output. AC voltage stabilized power supply circuit 220V input, adjustable DC stabilized voltage between the output of 5V ~ 20V, and the output ripple is less than 10mV. When the circuit overload or short circuit, protection circuit protection, and alarm circuit of LED lamp kept flashing warning; when the exclusion of overload or short-circuit fault, just press the reset button reset, make the silicon controlled rectifier, voltage regulator circuit can work normally. The normal state display real-time display of the output voltage digital control module. Keywords DC Stabilized Voltage Adjustable Protection Circuit  目 次 1 引言 1 1.1 课题研究背景 1 1.2 国内外现状 1 1.3 本文主要章节安排 2