仪表自动化实验装置设计(流量)解决方案.docVIP

摘要 本项目是对仪表自动化实验装置设计与制作的研究，项目中设备全部采用工业中实际的元器件，因此和工业中的电气控制系统是完全一致的可以检测流量、温度、液位、压力等四大热工参数，液位的测量与控制、压力的测量与控制、流量的测量与控制、温度的测量与控制等。Abstract This project is on the instrument design and production of automated experimental device study projects in the actual equipment used in all industrial components, so the electrical and industrial control system is exactly the same, allowing us to better management of the real one to learn. Laboratory equipment can detect flow, temperature, level, pressure and other four thermal parameters, and can be liquid level measurement and control, pressure measurement and control, flow measurement and control, temperature measurement and control. In this paper, the entire system electrical schematic and wiring diagrams, flow-based intelligent instrument control system as an example of the control process and control theory. Choose the hardware and wiring, and write MCGS configuration software program for intelligent instrument control. Finally, specific description of the experimental operation of the steps, through the whole fbi, to achieve the tuning of system parameters to achieve the desired control effect .Key words： Instrument automation, Test equipment, Control systems, MCGS, Flow 目录 摘要...........................................................3 Abstract.......................................................3 第一章 绪论...................................................3 1.1选题背景 3 1.2仪表装置研究目的及意义 3 1.3本课题研究的内容 3 第二章 仪表装置控制系统简介...................................3 2.1过程控制系统简介 3 2.2 基于组态软件的仪表装置系统方案简介 3 2.2.1一般计算机测控系统组成 3 2.2.2基于组态软件的仪表自动化监控系统方案 3 第三章 仪表装置硬件设计.......................................3 3.1工艺流程图 3 3.2硬件组成介绍 3 3.3监控系统硬件组成结构图 3 3.4描述基于上润仪表的控制系统搭建 3 3.4.1 基于上润仪表的控制系统搭建 3 3.4.1 选择执行器 3 3.3.3 流量传感器原理与特性 3 第四章 监控系统软件设计.......................................3 4.1MCGS组态软件简介 3 4.1.1MCGS组态软件的功能和特点 3 4.1.2MCGS组态软件的系统构成 3 4.2基于MCGS的监控界面设计 3 4.3MCGS组态 3 第五章 监控系统的组态实现与调试...............................3 5.1流量监控系统上位机与仪表通讯 3 5.2控制算法设计 3 5.2.1PID算法简介 3