国家坐标系与地方独立坐标系坐标转换方法与计算.docVIP

分类号： P221 2014年毕业论文  题 目：国家坐标系与地方独立坐标系坐标转换方法与计算 作 者 姓 名： 丁 可 学 号： 2012109105 系(院)、专业：地球科学与工程学院、测绘工程 指导教师姓名： 徐 长 海 指导教师职称： 助 教 2014 年 5 月 4 日 CLC：P221 The 2013 session of the undergraduate thesis Title: National coordinate system transformation method and local independent coordinate system and calculated For name：Student ID：Department： Mapping Engineering Name of instructor：nstructor titles：Teaching Assistant May 5, 20国家坐标系与地方独立坐标系坐标转换方法与计算 丁可 （地球科学与工程学院 12测绘工程专升本 234000） 摘 要 随着我国经济的发展的突飞猛进，对测量精度要求的建设也越来越高，就是以便满足实际运行要求。但在一些城市或大型工程建设中可能刚好在两个投影带的交界处，布设控制网时如果按照标准的3度或者1.5度带投影，投影变形会非常大，给施工作业带来不便，此时需要建立地方独立坐标系。认识国家坐标系的转换和地方独立坐标系统有一定的现实意义，如何实现两者的换算，一直是关注的工程建设中的热点问题。因此，完成工程测量领域国家坐标定位成果与地方独立坐标成果的转换问题，以适应城市化和实际工程的需要。 关键词：国家坐标；独立坐标；坐标转换 Abstract With the rapid development of the economic development of China, more and more is also high on construction of measurement accuracy, is in order to meet the operation requirements. But in some cities or large engineering construction may be just on the border of two projection zone, setting control network if according to the standard of 3 degrees 1.5 degrees or with projection, projective deformation will be very big, to inconvenience construction work, the need to establish local independent coordinate system. Meet national coordinate system transformation and the local independent coordinate system has certain practical significance, how to realize the conversion of the two, has been a hotspot problem in engineering construction. Therefore, complete engineering field state coordinates measurement results and achievements of local independent coordinate transformation problem, to meet the needs of the urbanization and the actual engineering. Key words: The state coordinates; Independent coordinates; C