四轮驱动电动汽车驱动方式控制系统设计详解.docVIP

四轮驱动电动汽车驱动方式控制系统设计 摘要 　　作为电动汽车行业新颖的发展方向，四轮驱动电动汽车由于其理想的控制特性和良好的应用前景，受到学术和工程界的普遍关注，已经成为研究热点。首先，根据整车参数和动力性的要求，计算出电机的功率、转速等主要指标，选定轮毂式无刷直流电机型号并进行简单的动力匹配。再根据不同工况，选择适合电动汽车的驱动方式，构建四轮独立驱动电动车的驱动方式控制的系统模型。其次，根据电动汽车行驶路面的路况和所处的工况，采用一定的控制策略和驱动策略，由切换电动机的工作状态，使电动汽车既可以在不同的工况（例如启动、爬坡及转弯）选择适应的驱动方式，又可以在不同等级的路面下（例如城市路面、高速公路）选择最佳的驱动方式，即做到电动汽车的即时四驱，从而最大程度地发挥电动汽车驱动方式控制的优点。最后，本文通过建立数学模型，并利用matlab进行软件仿真，来对轮毂电机驱动力模型、整车模型以及控制策略模型这些模型进行仿真试验。以上研究表明：四轮驱动是一种理想可行的驱动方案；本文建立的仿真模型合理实用。 　　 关键词：四轮驱动；驱动方式控制；不同工况；轮毂式无刷直流电机 Design of driving forms control system of four-wheel drive electric vehicle Abstract The four-wheel drive(4WD) EV is one of the developing directions for further EV. Because of its perfect controlling performance and good application prospect in engineering, 4WD EV have been getting universal attention by both academicians and engineers.It also has become a research hotspot of research.Firstly,according to the requirements of the vehicle parameters and power performance,we need to calculate main indicators such as the motor power, rotational speed, and select the model for wheel-hub brushless DC motor. According to different working condition, we should choose suitable driving forms for EV, and build up the model of driving control system about four-wheel independent drive EV.Then,according to EV working condition of pavement, we need to adopt certain control strategy and drive strategy.By switching the working state of the motor, 4WD EV can not only work in different conditions (such as starting, climbing and turning) to choose adapted drive forms, but also under different levels of the road (such as urban roads, highways) to choose the best way of driving.Which achieve the real-time four-wheel drive for EV, so as to maximize the advantages of EV driving forms control.Finally,by establishing the mathematical models and using MATLAB to simulation,we can set up the simulation models for driving force models of wheel-hub motor, vehicle models and control strategy models. Above resear