闸门与启闭机安装详解.doc

12 闸门与启闭机安装 12 INSTALLATION OF GATES AND HOISTS 安装场地布置及要求 12.1 Layout and Requirement of Installing Area 本项目闸门安装分为进水口拦污栅、进水口快速闸门、进水口检修闸门、灌溉孔进水口事故闸门与尾水检修闸门安装，安装场地较为分散。拦污栅安装场地包括自身的工作面与上游导水槽处，导水槽可以作为堆放设备与吊装的场地使用；进水口闸门安装场地主要布置于▽114高程的检修平台处，届时闸门的拼装、吊放下闸与吊装门槽都在此处工作；尾水检修闸门安装场地主要布置于孔口下游与尾水检修平台（包含平台两边的平地）处，孔口下游主要作为门槽吊装场地。 The installed gates of this project include intake trash racks, intake stop gates, intake bulkhead gates, intake emergency gates for irrigation holes and tail bulkhead gates, with dispersed installing areas. Installing area of trash racks includes its working surface and upper head r