基于单片机的篮球赛计时计分器器的设计本科生毕业设计（论文）.docVIP

南京工程学院 自动化学院 本科毕业设计（论文） 题目：基于单片机的篮球赛计时计分器器的设计 专业： 自动化 Gradustcion Design (Thesis) Design?of?the?splitter-based?single-chip? basketball game?time scoring By Zhouweijun Supervised by Prof. XING Can hua Department of Automstcion Engineering Nanjing Institute of Technology April, 2012  摘 要 此次设计属于计算机控制技术弱电课程设计，主要通过基于单片机STC89C51芯片座位本次核心控制元件，利用数码管座位显示器件，键盘输入电路等相关的软件的有机结合以及喇叭等辅助器件，构成了一个满足基本设计要求的篮球计时计分系统。本系统可满足倒计时方式显示单节比赛剩余时间，可暂停，显示双方得分，按键输入修改分值，如有错误可进行分值的相应修改。整场比赛结束时有声音提示。系统符合一般篮球赛计时器的工作要求。采用数码管显示器件，因为其微功耗、小体积、使用灵活等诸多优点在袖珍式仪器和低功耗应用系统中得到越来越广泛的应用，而且有利于硬件实物的成功。设计的主要方法主要是通过仿真确定方案的可行性，然后在进行局部测试实物是否满足仿真的设计要求，最后把整体电路搭建完成做最后的测试和调试。 关键词：STC89C51; 数码管显示; 计数器; 计分器 ABSTRACT The design is computer-controlled weak curriculum design, mainly through the combination of speakers and other auxiliary devices, the use of the software of the digital tube seat display, keyboard input circuit the microcontroller STC89C51 chip seat of the core control elements, constituting at the basic design requirements basketball timing scoring system. This system can meet the countdown display the remaining time of a single game to pause, to show both sides scoring key input to modify the score, if an error scores can be modified accordingly. The end of the game, a voice prompt. The system meets the requirements for the work of the general basketball timer. Digital display, micro-power, small size, the use of flexible and many other advantages to be more widely used in pocket-sized instrument and low-power applications, but also conducive to the success of the hardware in kind. The main method of design is to determine the feasibility of the program through the simulation, and then meet in kind during the local test simulation design requirements, the overall circuit structures to complete the final testing and debugging. Key words：STC89C51; digital display; counter; scoring   目 录 第一章 绪论 1 1.1 引言 1 1.2设计背景 1 1.3设计目的 2 1.4 设计意义 2 第二章 系统硬件介绍 3 2.1 MCS-51单片机简述 3