基于通用变频器的电梯plc控制系统的设计大学毕设论文.docVIP

毕业设计 基于通用变频器的四层电梯PLC控制系统的设计 专 业： 班 级： 学 号： 姓 名： 指导老师： 摘要 目前电梯控制系统主要有三种控制方式：继电控制系统、PLC控制系统、微机控制系统。PLC控制系统由于运行可靠性高，使用维修方便，抗干扰性强,设计和调试周期较短等优点，倍受人们重视，已成为目前在电梯控制系统中使用最多的控制方式。 关键词：四层电梯 控制系统 可编程控制器 组态王 PLC-based elevator control system design Abstract At present the elevator control system mainly has three control modes: Following electric circuit control system, PLC (Programmable Logic Controller) control system, microcomputer control system. PLC control system, because moves the reliability to be high, the use service is convenient, anti-jamming, the design and the debugging cycle is short and so on merits, time is taken seriously the people and so on merits, have become present use most control modes in the elevator control system. This article elaborated the elevator structure，the structure and the working principle of the programmable logic controller．Aim at the elevator of four floors，the writer design this elevator control system by the use of Siemens S7-200 programmable logic controller．The writer design the elevator control parts, such as, the part of register and cancel the instructions from the cabin, the part of register and cancel the instructions from the station hall, the part of choose station and direction, the part of door movement，the part of elevator operation，the part of shown layer ，and so on．These parts achieve the functions：registering the instructions from the cabin and the station hall, choosing the direction and the station of elevator，elevator go up or down and door automatically，fingering out the location of the cabin, and other functions.Also use kingview 6.53 complete pc to plc control elevator simulation. Key Words：Four-story Elevator; Control System ;ProgrammableLogic Controller; kingview 目录 摘要 I Abstract II 第一章 绪论 1 1.1 电梯的国内外发展状况 1 1.2课题的研究背景及意义 2 1.3 PLC在电梯控制中的应用以及发展