基于中弧面的模具型腔高质量重构方法研究本科毕业设计（论文）.docVIP

硕 士 学 位 论 文 （学 位 研 究 生） 题目 重构方法研究  Research of Turbine Blade Mould Cavity’s High Quality Reconstruction Based on Mean Surface By XXXX A Thesis Submitted to the Graduate Faculty of the Northwestern Polytechnical University In Partial Fulfillment of the Requirements for the Degree of MASTER OF ENGINEERING In Aeronautical and Astronautical Manufacturing Engineering ?ZHOU Limin 2013 Supervisor: Prof. XXX School of Mechatronic Engineering Northwestern Polytechnical University March，201X Xi’an，Shanxi，P. R. China  摘 要 航空发动机涡轮叶片需要承受高温、高压等恶劣的工作环境，对其成型精度和质量有严格的要求，是研制发动机的关键。目前，航空发动机涡轮叶片主要采用无余量熔模精密铸造，辅以机械加工的工艺来完成。为了提高叶片的成型精度，模具设计是关键。本文针对模具优化设计过程中长期存在的型面重构问题而展开，提出了基于中弧面的模具型腔高质量重构方法，为解决涡轮叶片的精确控形奠定了基础。 本文研究内容包括： （1）研究了提出了基于叶片设计理念的模具型腔重构方法。 （2）基于反变形的三角网格模型，提取截面线数据，并对线数据进行光顺处理，为中弧线精确提取奠定基础。 （3）研究了提取技术叶片成型过程中的变形规律，提出了中弧线基于最大厚度位置的法 （4）提出了基于中弧面的模具型腔重构的方法，通过对简单曲面的光顺重构代替复杂曲面的重构，避免了的曲面重构过程中的复杂的曲面拼接和光顺处理问题 （5） 关键词：模具型腔，型腔重构，中弧线，中弧面 专业排版，专业论文修改重复率 请联系 2861423674 淘宝搜索 @文天下 / Abstract Aero engine turbine blade works in bad working environment, and need to bear the high temperature, high pressure. So there is strict request for its forming precision and quality, also it is the key technology in development of engine. At present, the manufacture of aero engine turbine blade mainly adopts non-allowance precision casting, then with the use of mechanical processing technology to complete it. In order to improve the turbine blade forming precision, mould design becomes the key point. According to the long existing surface smoothness reconstruction problem during the mold optimal design process, this paper puts forward the high quality surface reconstruction method of mold cavity based on mean surface, and this laid a foundation for the turbine blade precision control. The main research content in this paper includes: (1) Study some main methods and problems in the reconstruction process of the blade mold cavity, and based on the concept of design, this paper puts forward the high quality r