触摸屏的简易手机电路设计本科生毕业（设计）论文.docVIP

摘 要 本系统是一个基于单片机的简易触摸屏手机。最近几年，手机的发展日新月异，特别是android操作系统和触摸屏的便捷性，使触摸屏手机迅速普及，触摸屏手机将是未来手机的主流配置，此系统就是研究触摸屏手机的工作原理及实现方法。整个系统主要是由STC12C5A60S2单片机，SIM300模块，串口触摸屏及一些外围器件组成的，主要功能的实现方法是：先用触摸屏配套PC组态软件和PS软件提前设置好触摸屏的图标和数字键盘等主要显示界面，然后下载到触摸屏的内部存储器中，供触摸屏内部处理；当按下相应的触摸按键后，把触摸屏的内部处理后的数据通过单片机的串口1发送给单片机，之后单片机进行相应的运算处理和判断，再通过单片机的串口2给SIM300模块发送相应的AT操作指令，驱动SIM300模块发送对应的手机信号。通过以上模块，可以实现：接、打电话，接、发英文短信，有来电提醒功能，以及实时时钟的功能。 关键词：手机；SIM300模块；串口触摸屏；实时时钟 ABSTRACT This system is a simple microcontroller-based touch screen phone. In recent years, development of mobile phones is very fast. Especially because the android operating system and touch screen is very convenient, touch screen mobile phone is more and more popular. Touch screen mobile phones will be the most mainstream configuration in?the?future.The?whole?system?is?mainly?composed?by?STC12C5A60S2?microcontroller,Sim300 module, serial touch screen, and some peripheral devices. The realization method of the main function is: firstly use a touch screen supporting PC configuration software and PS software, set touch screen icon and numeric keypad and other display interface in advance. Then download to the internal memory of the touch screen ,let internal?touch?screen?process;If?the?corresponding?touch?button?is?pressed,sent?the?data?of?processed?by?the?touch?screen?to?the?microcontroller?via?a?serial?microcontroller,Then?the?microcontroller?executes?the?corresponding?arithmetic?processing?and?judgment.?Then?the controller send the appropriate AT command to SIM300 module through the serial 2.And Drive the SIM300 module sending mobile phone signal. The system also adds a 1302 clock chip, time can be displayed in real time. Through the above module, this system achieves: receive, make a phone call; Receive, send English text messages. There is an incoming call reminders, and perpetual calendar. Also it can set the alarm clock. Key Words: mobile phone; SIM300 module; serial touch screen; perpetual calendar 目 录 1 引言 1 1.1课题研究的背景 1 1.2课题研究的目的及意义