基于gtm900c的家用安防系统本科生毕业设计（论文）.docVIP

编号：  毕业设计说明书 题 目：学　　院： 专 业： 学生姓名： 学 号： 指导教师： 赵学军 职 称： 高级工程师 题目类型：(理论研究 (实验研究 (工程设计 (工程技术研究 (软件开发 传感器技术是现代科技的前沿技术，许多国家已将传感器技术列为与通信技术和计算机技术同等重要的位置称之为信息技术的三大支柱之一。目前敏感元器件与传感器在工业部门的应用普及率已被国际社会作为衡量一个国家智能化数字化、网络化的重要标志因此传感器技术作为一种与现代科学密切相关的新兴学科正得到空前迅速的发展并且在当多领域被越来越广泛的利用。STC12C5A60S2单片机为核心控制器，利用了GTM900C模块的无线通信功能，通过单片机的串口与GTM900C模块进行连接，单片机通过AT命令在模块上建立起PUD数据服务器，接收到网络客户端的命令并进行命令解释，实现客户端与模块之间的双向数据通信功能。 本文首先对各系统组成模块进行了详细的阐述，介绍了单片机短消息收发系统的组成以及单片机与通信模块GTM900C 的接口方式，AT 控制指令集，( PDU) 格式进行了分析。最后介绍系统的具体制作过程和硬件、软件、整体调试，并给出了测试数据。 本设计具有体积小、性价比高、可靠性强等特点，同时提供了透明、高效的数据采集与控制通道，可以在智能家居领域广泛应用。 关键字：单片机；GTM900C模块；数据采集模块；12864显示；AT指令 Abstract The sensor technology is cutting-edge technology of modern technology, many countries have sensor technology as important as the location and communication technology and computer technology, called one of the three pillars of the IT. Sensitive components and sensors are considered as an important symbol to measure a country of intelligent and digital network in the industrial sector penetration by the international community. Therefore, the sensor technology as a modern science is closely related to the emerging discipline is an unprecedented rapid development, and many areas in todays increasingly extensive use. Designed a data acquisition and control system based on the GSM network communications, discusses STC12C5A60S2 microcontroller as the core controller, use GTM900C module wireless communication capabilities to connect through the serial, and GTM900C module of the microcontroller, the microcontroller through the AT command module to establish a PUD data server, network client receives the command and the command interpreter to achieve two-way data communication between the client and the module function. First of each system component modules described in detail microcontroller short messaging system composition and the interface of mic