透水水泥混凝土的力学性能 毕业设计外文资料翻译.docVIP

外文参考资料 Mechanical properties of pervious cement concrete CHEN Yu1, WANG Ke-Jin2, LIANG Di1 1. School of Traffic and Transportation Engineering, Changsha University of Science and Technology, Changsha 410004, China; 2.Department of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA50010, USA ? Central South University Press and Springer-Verlag Berlin Heidelberg 2012 Abstract: Compressive and flexural strength, fracture energy, as well as fatigue property of pervious cement concrete with either supplementary cementitious materials (SCMs) or polymer intensified, were analyzed. Test results show that the strength development of SCM-modified pervious concrete (SPC) differs from that of polymer-intensified pervious concrete (PPC), and porosity has little effect on their strength growth. PPC has higher flexural strength and remarkably higher flexural-to-compressive strength ratio than SPC at the same porosity level. Results from fracture test of pervious concrete mixes with porosity around 19.5% show that the fracture energy increases with increasing the dosage of polymer, reflecting the ductile damage features rather than brittleness. PPC displays far longer fatigue life than SPC for any given failure probability and at any stress level. It is proved that two-parameter Weibull probability function describes the flexural fatigue of pervious concrete. Key words: pervious concrete; strength; fracture; fatigue life 1 Introduction Pervious cement concrete was a concrete with continuous voids that were intentionally incorporated into concrete by blending with no or very little amount of fine aggregates. Cementitious materials were not enough to fill the voids among coarse aggregates with special particle-size distribution to make interconnected macro pores [1?2]. The range of porosity that was commonly reported for pervious concrete utilized in pavement, was about 15%?25% [3?4]. The significantly reduced strength of conventional pervious concre