风力发电机齿轮箱润滑油温度监测系统介绍.docVIP

摘要 提出在风力发电机组齿轮箱润滑系统中，如何设计制作一个性能良好的温度监控系统，实现温度的精确、实时监控成为设计该系统的主要问题。随着我国电子技术的不断提高，应用MSP430单片机及其控制电路，结合复合PID算法、GSM-Modem通信技术，控制风扇或加热器进行冷却或加热以实现对润滑油温度的精确控制的方法。 论文介绍了风力发电机齿轮润滑油温度监测系统的研究背景和研究意义，国内外发展状况，超低功耗系列单片机MSP430，单总线数字温度传感器DS18B20等器件以及设计所需的相关软件的使用。在此基础上，对系统进行设计、编程和调试，并绘制了系统的电路原理图和印制板图。该温度监控系统具有监控多点温度，并将其循环显示，利用按键实现某一点的选择显示，从而实现多点温度的实时监控的功能。 关键词:温度控制,齿轮箱润滑,MSP430单片机,全球移动通讯系统调制谐调器,风力发电 ABSTRACT Jiang bin (school of Shandong Jiaotong University) Abstract; As the performance of gear oil is influenced by temperature,how to design a good performance of the temperature monitoring system, accurate, real-time monitoring of temperature become a major problem in the design of the system. With the development of electronic technology, the continuous improvement of our, the method of remote temperature supervision and control is developed here.Fan or heater is controlled to cool or heat up the lubrication oil in the windmill gear-box with MSP430 and its control circuit, combined with hybrid PID algorithm and GSM-Modem communication technology. This paper introduces the wind turbine gear lubricating oil temperature monitoring system of the research background and research significance, the domestic and foreign development status, ultra low power MSP430, single bus digital temperature sensor DS18B20 devices and related software design required. On this. On this basis, design, programming and debugging of the system, and drawing the circuit diagram of the system and the printed circuit board layout. The temperature monitoring system plays a monitoring point temperature, and the cyclic display, achieve a point selection display using a key, so as to realize the real-time monitoring of the multi-point temperature function. Key words: temperature-control, gear-lubrication,MSP430 micro-controller, global system for mobile communication modem (GSM-Modem),wind energy power 前 言 随着传统化石资源的枯竭，绿色、环保、可再生的风能引起了人们的关注。风能是自然产生的取之不尽、用之不不竭而又不会产生任何污染的可再生资源。它因空气流动做功而提供给人类的一种可利用的能量，因此被人们广泛应