PLC在电梯控制中的应用-毕业设计(论文).doc

PLC在电梯控制中的应用 摘 要 随着现代经济和城市生活的发展，电梯成为人们日常生活必不可少的代步工具，电梯性能的好坏对人们生活的影响越来越显著。根据顺序逻辑控制的需要发展起来的可编程控制器(PLC)，它是专门为工业环境应用而设计的数字运算操作的电子装置。PLC处理速度快，可靠性高，能够保证电梯正常、安全、可靠地运行。同时，由于电机交流变频调速技术的发展，电梯的拖动方式己由原来直流调速逐渐过渡到了变频调速，不仅能满足乘客的舒适感和保证平稳的精度，还可以降低能耗，节约能源，减小运行费用。本文将基于PLC的变频调速方法应用到电梯系统中，并对此方法进行研究。 首先，分别阐述了电梯继电器控制和PLC控制的特点，突出讲述继电器电梯控制系统暴露的缺点以及PLC电梯控制系统所具有的优点，并对电梯的变频调速控制进行了介绍。其次，对电梯技术和电梯设备的发展进行了综述。然后，介绍了变频器类型以及参数设计的相关知识同时介绍了PLC选型原则以及PLC控制系统的设计思路在此基础上，根据电梯系统自身的工作状态要求，进行电梯系统的PLC软件开发，通过软件开发的特点，结合PLC自身的控制规律，设计出可实现一定功能的PLC电梯控制系统。 关键词电梯，可编程控制器，变频调速，旋转编码器 Along with the development of modern economy and city life, the elevator has become a essential walking tool for people in daily life, and the performance of elevators obviously influences people’s lives. The programmable logic controller(PLC),which develops based on sequence logical control, is digital operation electronic device specialized in the industrial application environment. PLC possesses fast process speed and high reliability. Therefore, PLC can be able to ensure the elevator run normally, securely and reliably. In addition. The drive method of elevators has replaced the DC velocity modulation with frequency control due to the development of AC frequency control of motors. The frequency control not only satisfies the comfort sense of passengers and ensures the stable precision, but also decreases the loss of power, saves resources and reduces expenses. The frequency control method based on PLC is applied to the elevator system and further researched. Firstly, the essay respectively presents the characteristics of the elevator system based on relay control and PLC control, specially formulates the defects exposed from relay control system and the advantages of PLC control system, introduces the frequency control of elevators. Secondly, The development of elevator techniques and elevator devices is over-viewed. And then, the relative knowledge of frequency-converter is introduced; the principle of PLC model election and design