LTE系统接口教程分析.ppt

* * * * * * * * * * * * * * * * * * * * Course Name Confidential Information of Huawei. No Spreading Without Permission N-* Note instruction Font: FrutigerNext LT Regular Font Size: 11 Item symbol Size: 70% Row Space: 1.25 Segment: 3 pound * * Step 1 1. Layer 1 procedure is triggered upon request of a preamble transmission by higher layers. 2. A preamble index, a target preamble received power (PREAMBLE_RECEIVED_TARGET_POWER), a corresponding RA-RNTI and a PRACH resource are indicated by higher layers as part of the request. 3. A preamble transmission power PPRACH is determined as PPRACH = min{Pmax, PREAMBLE_RECEIVED_TARGET_POWER + PL}, where Pmax is the maximum allowed power that depends on the UE power class and PL is the downlink pathloss estimate calculated in the UE. 4. A preamble sequence is selected from the preamble sequence set using the preamble index. 5. A single preamble is transmitted using the selected preamble sequence with transmission power PPRACH on the indicated PRACH resource. Step 2: 6. Detection of a PDCCH with the indicated RA-RNTI is attempted during a window controlled by higher layers, If detected, the corresponding PDSCH transport block is passed to higher layers. The higher layers parse the transport block and indicate the 20-bit UL-SCH grant to the physical layer RAR assigns a Temporary Cell Radio Network Temporary Identifier (C-RNTI) to the UE as well. 7. The higher layers indicate the 20-bit Random Access Response to the physical layer. The content of these 20 bits starting with the MSB and ending with the LSB are as follows: - Hopping flag – 1 bit - Fixed size resource block assignment – 10 bits - Truncated modulation and coding scheme – 4 bits - TPC command for scheduled PUSCH – 3 bits - UL delay – 1 bit CQI request – 1 bit 8. If the UE does not receive a RAR within the configured time window, it retransmits the preamble. Step 3: 9. It includes the Temporary C-RNTI allocated in the RAR at Step 2 and either the C-RNTI if