大学学位论文变形监测技术在高层建筑施工中的运用application of deformation monitoring technology in the construction of highrise building翻译及原文.docVIP

Application of deformation monitoring technology in the construction of high-rise building Abstract in this paper According to the authors working experience in determining method of design and the observation period of deformation monitoring scheme, on this basis, the specific method of building deformation monitoring, believe to be engaged in relevant work of reference. Keywords: monitoring scheme of building engineering static deformation monitoring A tall, deformation monitoring report 1.1 the content of deformation monitoring Since the project design by reliability design theory and method, deformation monitoring provides the design basis, means of optimization design and reliability evaluation is indispensable to become, become an important means of engineering design and construction quality control. Because of the complexity and particularity of the project itself, in general, the direct use of deformation monitoring data on safety and stability of states of high-rise building are evaluated and feedback is difficult. Therefore, in order to achieve the purpose of safety design of high-rise buildings, the general needs of different characteristics and requirements of specific engineering and deformation monitoring in different periods and different methods of selecting means respectively, analysis work conscientiously do a good job of monitoring data and information collation, evaluation, prediction and forecast for safe and stable state of Gao Cengjian building, and provide scientific the basis for the improvement of construction engineering design, construction method and operation management. 1.2 Ambient monitoring excavation engineering In city building dense area construction, not only to ensure the safety of high-rise building itself, must also ensure the safe use of adjacent buildings. In the construction process of excavation and later, as the decline of underground water level, the increase of load and some other uncertain factors, would inevitably l