产万吨薄板坯连铸连轧.doc

河北联合大学轻工学院 QINGGONG COLLEGE, HEBEI UNITED UNIVERSITY 毕业设计说明书 设计（论文）题目：年产200万吨薄板坯连铸连轧 带钢生产线工艺设计 学生姓名： 学 号： 专业班级： 学 部：材料化工部 指导教师： 2010年05月日 摘 要 薄板坯连铸连轧与传统生产工艺流程相比，具有可节约投资、提高成材率、降低生产成本、大幅度缩短生产周期等优点。目前市场上对薄带钢如镀锌板的需求很大，而用传统的冷轧花费较高，生产周期长。有些一般用途薄板如果能用热轧直接生产，这将大大降低成本。这也进一步促进了对薄板坯连铸连轧技术作更深层次的研究。 基于上述前提，结合目前国内外薄板坯连铸连轧的生产状况，本文设计了年产200万吨薄板坯连铸连轧带钢的生产工艺。在本次设计中，重点是对工艺进行设计，通过采用两架粗轧和六架精轧轧机，缓和以往薄板车间生产超薄规格时板形、跑偏等问题，而且适应今后板坯向中薄方向发展的趋势具有开发新产品的巨大潜力。另外合理地选取了结晶器，减少拉漏事故和优化了铸坯质量，为新产品的开发奠定了基础。最后还对本次设计的可行性进行了分析，使得本次的设计能符合实际的要求。设计中涉及的系数部分取的也是现场的经验数值，用到的部分公式也是来自于实际的经验公式，最终完成了本次的设计。 关键词： 薄板坯连铸连轧；层流冷却；轧制新工艺 Abstract Comparing with the traditional production technical process, thin slab continuous castin and rolling technical process has the advantage of saving the investment, improving useful adult rate, reducing the production cost, reducing the production cycle and so on. At present in market the demand of thin slab like galvanized sheet is very big, but with traditional cold rolling expenditure too high, production cycle long, also is not easy to control the production, if hot rolling can use to produce this kind of thin belt even the ultra thin belt product, it will have the significant significance. It also further promotes to roll over the technology to thin slab continuous casting and rolling to make a deeper level the research. Basing on the above premise, combining the production condition which the unions at present domestic and foreign thin slab continuous casting and rolling, I have designed the production rolling over which can produces 1.5 million ton per year. In this design, focused on the design process, through the use of two rough and rolled 6 finishing mill, easing past workshop production of thin sheet specifications shape, deviation and other issues, but also adapt to the slab in the future thin direction of the development trend of the development of new products with great potential. In addition to select a reasonable mold, reduce accide