学位论文论文中英文翻译一 zx2018c型直流稳压电源及充电器的工作原理.docVIP

One ZX2018C DC power supply and battery charger works 1 Products The products and the charger from the power supply composed of two parts; power supply output 3V, 6V DC voltage, radio and other small appliances can be used as an external power supply; charger to 5, 7, rechargeable battery for constant current charge. 2 features and main parameters DC power supply; input voltage; AC 220V; output voltage; DC 3V, 6V; maximum output current: 500ma. Battery Charger: left channel (E1, E2) charging current 50-60ma (normal charge); right channel (E3, E4) 110-130 charge current (fast charge), two channels can be used simultaneously, each can be charged 5 or 7, two sections of the battery. Power supply and battery charger can be used simultaneously, as long as the two currents and no more than 500ma. 3 Board composition and working principle Description: The name of the board are: circuit board, PCB, aluminum plates, high frequency board, PCB, ultra-thin circuit boards, ultra-thin circuit boards, printing (copper engraving technology) circuit boards. Mini of the circuit board, visualization, for a fixed volume and optimize the circuit layout plays an important role with the electrical. Single Panel (Single-Sided Boards) We have just mentioned, the basic PCB, components concentrated in one side, wires are concentrated on the other side. Because the lead only in one side, so we call this is called single-sided PCB (Single-sided). Single-panel design lines because there are many strict restrictions (because only one side, the wiring between the AC * and must not be alone around the path), so only until the early use of such a circuit board. Double Sided (Double-Sided Boards) Both sides of this circuit board wiring. But with a wire on the sides, the sides must have the appropriate electrical connections between the Caixing. The circuit between a bridge is called the pilot hole (via). Pilot hole in the PCB, the holes filled or coated with metal, it can be connected to the wi