On_Semi_NCL300输入90-265_Vac_60W离线LED驱动方案.docxVIP

On Semi NCL30051输入90－265 Vac 60W离线LED驱动方案 On Semi 公司的NCL30051是用于离线LED照明解决方案的PFC和半桥谐振组合控制器,集成了实现高效率和小型LED驱动器/电源所需的所有功能,包括临界导通模式(CrM) PFC升压控制器和内置的600V驱动器的半桥谐振控制器,主要用于高效LED驱动器和电源,电控制齿轮以及照明镇流器.本文介绍了NCL30051主要特性,方框图,典型应用电路以及60W评估板NCL30051LEDGEVB指标,电路图和材料清单(BOM).NCL30051LEDGEVB:60W 90-265 Vac 35-50 V Constant Current up to 1.5A Isolated LED DriverThe NCL30051 is a combination of PFC and half?bridge resonant controllers optimized for off?line LED lighting solutions. This device integrates all the features needed to implement a highly efficient and small form factor LED Driver/Power Supply. It contains a critical conduction mode (CrM) power factor correction (PFC) boost controller and a half?bridge resonant controller with a built?in 600 V driver. The half?bridge stage operates at a fixed frequency, greatly simplifying the control implementations. The output (current or voltage) regulation is achieved by adjusting the PFC stage output voltage ? based on a control signal generated external to the NCL30051.This device includes an enable input on the PFC feedback pin, open feedback loop protection and PFC overvoltage and undervoltage detectors. Other features included in the NCL30051 are a 600 V startup circuit and an adjustable frequency oscillator with a divide by 2 circuit to assure true symmetric duty ratio. The controllers are properly sequenced, simplifying system design.NCL30051主要特性:Voltage Mode CrM Power Factor Correction Controller??PFC Open Feedback Loop Protection??PFC Undervoltage Detector??PFC Overvoltage Detector??Half?Bridge Stage with 600 V High Side Gate Drive??State Machine Ensures Proper Turn?on and Turn?off of Half?Bridge Stage??Controllers are Properly Sequenced for Fault Free Operation??Non?Latching Fault Management??Internal 600 V Startup Circuit??Wide Temperature Range of ?40C to +125C??This is a Pb?Free Device??NCL30051典型应用:High Efficiency LED Drivers and Power Supplies??Electronic Control Gear??Lighting Ballasts??