【河南理工大学毕业设计】110kV变电站综合自动化系统设计要点分析.docVIP

摘要 本课题针对110kV变电站供电系统，结合国内外变电站综合自动化技术的发展现状，根据变电站的监控求，对0kV变电站自动化系统进行了。在系统研究过程中，重点进行了以下工作： 首先，根据和监要求，变电站自动化系统的设计原则，研究自动化体系结构，根据所给出的原始数据，变电站设计原则和国家法律法规，变电站监要求，设计变电站的主路接线；进行了变电站负荷的简计算然后选择基本设备。，断路器控制的重要性，设计断路器；设计 关键词：变电站；PLC；断路器 ABSTRACT This topic is for 110kV substation power supply system, combined with the development of substation automation technology at home and abroad. According to transformer substation monitoring requirements, 110kV substation automation system is for design. And the study is summarized as the follow steps．First of all, covers domestic and foreign development of substation automation, purpose and significance of the research on substation automation, brings out the design of substation automation system. Secondly, according to the Sourcebook of substation and monitoring requirements, and substation automation system design principles, research and design the automation system’s structure and function. Third, according to the original data, integrating principles of substation design and national laws and regulations, systems, and the substation monitoring requirements, design the main circuit wiring of substation; simple calculations to select the basic equipment of substation load. Fourth, outline the operation process of PLC and design the PLC control system; according to the importance of high-voltage circuit breaker control and PLC control circuit breaker’s advantage, design using PLC control to high voltage circuit breaker; based on the importance of integrated bus coupling spare switching and operational processes, design the PLC control system of automatic bus transfer system. Finally, draw a conclusion of the papers design and design process, sum up the problems and defects in design, and where to work toward. Keywords: Substation; PLC; High-voltage Circuit Breaker; Alternate Device Auto-switching目录 1 绪论 1 1.1 变电站综合自动化概述 1 1.2 国内外变电站综合自动化现状及发展 1 1.2.1 国外变电站自动化技术的现状及发展 1 1.2.2 国内变电站自动化技术的现状及发展 2 1.3 变电站综合自动化研究目的与意义 3 1.4 课题研究的主要