齿轮箱体钻扩机床液压系统设计（含全套CAD图纸）.doc

买文档送CAD图纸，QQ齿轮箱体钻扩机床液压系统设计 摘 要：本课题内容是设计汽车齿轮箱体上钻的孔的液压系统。孔的加工分三道工序：钻孔、粗扩孔、精扩孔。首先，加工的底孔；然后，粗扩的孔；最后，精扩的孔；已达到课题所需的精度。因此本液压系统采取多缸快慢速互不干涉回路——双泵供油互不干涉回路；液压系统的联结方式为集成块式。此回路解决了一般液压系统中的多缸快慢速相互干涉。 关键词：集成块；双联泵 Design the hydraulicylinder system drilling the cylinder of the Gear box Abstract: This paper contents a liquid system of drilling the bore of Gear box . The bore processes to divide three works preface: Drill a hole, then rough-drill a broe of, the expand-drill the bore .First, Processing?of??of the?bottom outlet; rough-drill a bore of ;Finally, finishing drill the bore; Arrive the l