【参考】基于proe的柱塞泵建模及运动仿真.docVIP

基于pro/e的柱塞泵的建模及运动仿真 [摘要] 柱塞泵是的一个重要装置。软件是现今最成功的CAD/CAM软件之一软件[1]。本文介绍了Pro/E软件，利用Pro/E软件从零件建模、装配、机构运动仿真几个方面来完成泵三维Pro/E；柱塞泵；建模；运动仿真；工程图 Based on Pro/E of Displacement Pump Modeling and motion simulation [Abstract] Displacement pump is an important equipment of hydraulic circuit. modeling and motion simulation are indispensable in the process of designing. The Pro / E software is one of the most successful CAD / CAM software by now.Through the modeling and motion simulation by Pro/E, the parameters of each module can be more precise, and it’s easier to design the optimal movement state of each module. This paper makes an introduction of employing Pro/E in the three dimensional modeling design of displacement pump. The design of displacement is mainly carried out in the aspects of module modeling, assembly design, and organization movement simulation. Finally, make the 3D into 2D engineering drawing. [Key words] Pro/E; Displacement Pump;Modeling; Motion Simulation；Engineering Drawing 目录 0 引言-------------------------------------------------------------1 1 Pro/E 软件简介---------------------------------------------------1 2 设计概述---------------------------------------------------------2 3 设计过程---------------------------------------------------------3 3.1 柱塞泵零件建模----------------------------------------------3 3.2 柱塞泵的虚拟装配-------------------------------------------11 3.3 柱塞泵机构运动仿真-----------------------------------------17 3.4 零件的三维模型图转换成二维工程图---------------------------22 结论---------------------------------------------------------------24 致谢语-------------------------------------------------------------25 参考文献-----------------------------------------------------------26 0 引言 Pro/E（Pro/Engineer操作软件）是美国参数技术公司（Parametric Technology Corporation，简称PTC）的重要产品。在目前的三维造型软件领域中占有着重要地位，并作为当今世界机械CAD/CAE/CAM领域的新标准而得到业界的认可和推广，是现今最成功的CAD/CAM软件之一。[2]。它提出的单一数据库、参数化、基于特征、全相关及工程数据再利用等概念改变了MDA(Mechanical Design Automation)的传统观念。这种全新的概念已成为当今世界MDA领域的新标准。 柱塞泵是的一个重要装置利用柱塞在泵缸体