【参考】基于ProE的行星齿轮减速器设计.docVIP

基于Pro/E的行星齿轮减速器设计 （**大学 **学院 机械 ** **） 摘 要 目前，减速器作为机械传动装置应用日益广泛，但其复杂的结构给设计工作带来了重复性和繁琐性。正基于此，本论文开发了基于Pro／E的渐开线行星齿轮减速器三维参数化CAD系统，通过该系统，用户可以在可视化平台上实现交互式设计，大大提高其设计效率和设计质量，缩短产品的开发周期，也方便了产品后续的运动仿真和有限元分析等，符合现代设计思想的发展要求。 Abstract At present, gear reducer is a mechanical driving device which is extensively applied in mechanism. But designing reducer is a perplexing and iterative process because of its complicated structure. The paper expounds the techniques of building a 3D parametric CAD system of involute planetary reducer based on Pro/E. Through this system, users can interactively design all parts of the reducer on the visual circumstance. This system not only improves designing quality and efficiency, but also be of value to movement simulation and finite element analysis. So it satisfies the development of modern designing. Pro/E is an entity designing system of 3D CAM/CAD. The most notable merit of Pro/E is the powerful function in modeling. And now, it is applied widely in industry design, and used by more and more designers in 3D design. In this paper, the planetary decelerator is design based on the Pro/E. Our works mainly include the design of planetary transmission, calculation of the load balancing mechanism, design of organization calculate, the choice of axle and axletree according to our calculation data, and modeling the whole process using Pro/E. Because of the different numbers of teeth of the two inner gear wheels in the decelerator, and the public planetary gear should mesh with the two inner gear wheel at the same time, so the planetary decelerator must adopt the angle correcting. In reality, because of unavoidable errors in manufacture and installation of the planetary decelerator, and the influence by the factors such as the deformation of component, etc., the non-uniform of the load of the planetary wheels distribution is caused. Based on the entity designing system Pro/E, our design can discover the problems more intuitively and can optimize the