pm2.5的简介与测定毕业设计教案分析.doc

南京信息职业技术学院 毕业设计论文 作者 张加柱 学号 40 系部 微电子学院 专业 光伏发电技术及应用（智能环境信息技术） 题目 雾霾问题与PM2.5测定的研究 指导教师 秦玉芳 评阅教师 完成时间： 2014 年 4 月 7 日 毕业设计(论文)中文摘要 题目：雾霾问题与PM2.5测定的研究 摘要：本论文的目的在于普及雾霾有关的知识，阐明雾霾的危害以及雾霾的治理措施与案例，雾霾天气应注意的事项等。简介一下几种PM2.5的测定方法。意义则是让大家了解雾霾的成因及危害，雾霾天气应该注意的事项，保护好自己。 了解雾霾问题的形成原因，简单的防治措施与注意事项。了解PM2.5的几种简单的测定方法原理和大致流程。要想测定PM2.5的浓度，需要分两步走：第一步：把PM2.5与较大的颗粒物分离；第二步：测定分离出来的PM2.5的重量。目前，各国环保部门广泛采用的PM2.5测定方法有三种：重量法、β射线吸收法和微量振荡天平法。这三种方法的第一步是一样的，区别在于第二步。 关键词：雾霾?成因?防治?PM2.5?环保 Graduation design (paper) English abstract Title : Haze problems and research for the determination of PM2.5 Abstract: The purpose of this paper is to popularize haze related knowledge, show the dangers of smog and haze governance measures and case, should pay attention to matters such as haze weather. There is an overview of the several kinds of methods to determine the PM2.5. Meaning is to let everybody understand the cause of the haze and the damage of the fog weather should pay attention to matters, to protect yourself. To understand the reasons for the formation of smog problem, a simple prevention measures and matters needing attention. The understanding of the principle of several kinds of simple measuring method of PM2.5 and general process. For measuring the concentration of PM2.5, need a two-step: the first step: PM2.5 and larger particles separation; The second step: to determine the weight of the separation of PM2.5. Widely used at present, the national environmental protection department of PM2.5 there are three kinds of method: weight method, beta ray absorption method and trace oscillating balance method. The first step of these three methods is the same, the difference is that the second step. keywords: haze?factor?prevention and treatment?PM2.5?Environmental protection 目录 1.引言...................................................