SMT中英文专业术语教程要点.pptVIP

Definition：Process of transferring solder paste onto the pads of a PCB, by forcing it through mating apertures on a stencil, using a squeegee Main Elements of the Screen Printer/印刷机要素 Print Parameters/印刷参数 Print Defects/印刷缺陷 PCB transport Board alignment Board alignment 深圳市共进电子有限公司 SMT中英文专业术语教程 更新日期：2011.09 1.印刷工艺专业英语 2.贴片工艺专业英语 3.回流工艺专业英语 针对新入职或有一定基础的职员 2小时 罗卫龙 使大家对SMT专业英语有所了解，能够看懂一些专业素材 培训目的 培训对象 培训讲师 学习重点 培训课时 Printing Process English/印刷工艺英语 测试OK后 转DIP插件 印刷（Printing）： 目的：借助于钢网把锡膏印刷在PCB之焊盘（PAD）上 贴片（Mount）： 目的：将贴片元件准确的贴装到PCB焊盘上 回流焊（Reflow）： 目的：把完成贴片的PCB经由一定的温度曲线使锡膏与PCB，元件之间形成机械连接 AOI（自动光学检测）： 目的：自动检测PCBA板上各种不同帖装错误及焊接缺陷，确保SMT不良品不会流入下一道工序 SMT：Surface Mount Technology/表面贴装技术 Board loader/上板机： PCBs to be transported to the screen printer using conveyors Printer/印刷机： deposits solder paste onto pads on the circuit board PCB（Printed circuit board）/印制线路板 Solder paste/锡膏： Mixture of solder powders and flux deposited onto pads of circuit board on a controlled volume. After reflow provides electrical, mechanical and thermal connection between component and board Squeegee/刮刀: Critical tool used to “push” paste through the designated openings Stencil/钢网：Vehicle by which the volume and placement location of solder paste deposition is controlled Foil/钢片 Frame/外框 Flex Mask/绷网 Aperture/开孔 Input Conveyor/输入导轨 Solvent tank/容剂曹 Monitor/监控器 Output Conveyor/输出导轨 Light tower/指示灯 Emergency stop buttons/紧急制动开关 Vision system/视觉系统 Clamps/夹子 Board support/支撑块 Or support Pins/支撑顶针 stencil/钢网 Squeegee/刮刀 Angle of Attack (45° or 60° with stencil)/角度 ：The angle made by the front of squeegee blade in relation to the stencil Snap-Off (Contact or Non-Contact)/印刷间隙 ：The distance from the top surface of the PCB to the bottom surface of the stencil Squeegee Pressure/刮刀压力 ：Controls the shear stress，The total force with which the squeegee is pushing onto the board Squeegee Speed/刮刀速度 ：Controls the shear rate，The velocity at which the squeegee traverses across the stencil Separation Speed/分