毕业设计论文_红阳三井主副井—北风井间巷道贯通测量设计.docVIP

提供全套毕业设计，欢迎咨询 摘要 贯通测量是矿山测量工作的一项重要工作，贯通工程质量的好坏，直接关系到整个矿井的建设、生产和经济效益。 贯通测量工作涉及地面和井下，不但要为矿山生产建设服务，也要为安全生产提供信息。贯通测量的任何疏忽都会影响生产,甚至可能导致事故的发生。因此，贯通测量是一项非常重要的测量工作。要完成贯通测量任务，就必须做到精心设计、精心施工，合理地选择贯通测量方案。根据贯通测量的容许偏差，选择合理的测量方案和测量方法，进行贯通误差预计，明确采用的仪器和方法，做到先设计后施工，严格执行技术规范要求，使测量工作能安全有序、顺利地进行。 矿井的顺利贯通能加快矿井的建设速度，缩短了建井的周期、保证正常的生产交替并且提高了矿井的年产量。本文介绍了红阳三井主副井—北风井间巷道贯通测量的测量方案和方法，分别采用了两套方案进行叙述，从地面测量、联系测量和井下测量的误差预计及方案优化等方面对贯通测量工作进行了分析，将预计的理论值与《规程》相比较，选出最优方案作为本次贯通测量的最终设计方案，确保贯通安全、正确的进行。 关键词：贯通测量设计；误差预计；最优方案 Abstract Through measurement, mine survey work is an important work, through good and bad quality of the project is directly related to the construction of the mine, production and economic benefits. Through measurement of surface and underground work involves not only production and construction services for mining, but also for safety information. Through the measurement will affect the production of any negligence, and may even lead to accidents. Thus, through measurement is a very important measurement. To accomplish the task through measurement, it must be carefully designed, well construction, a reasonable choice through measurement programs. According to the measurement tolerance through, choose the right programs and methods of measurement, is expected to be through error, clear instruments and methods used, so the first after the design construction, and strict implementation of technical specifications, so that measurements can be safe and orderly and smooth Manner Smoothly through the mine shaft construction speed can be accelerated, shortening the construction cycle of the well, to ensure normal production and increased the turn of the mine per year. This article describes the main shaft of the red sun Mitsui - through the north tunnel between wells and methods of measurement of the measurement program were described by two sets of programs, measured from the ground, contact measurements and downhole measurement error is expected and the aspects of optimizatio