徕斯机器人配套RCTServiceSchulungMechaniken概论.docx

1) Total design of the machine 1.1) Main assemblies RCT2000-2 Double-tip casting machine Service Training Mechanics RCT2000-2 Double-tip casting machine Service Training Mechanics 1) Total design of the machine 1.1) Main assemblies RCT2000-2 Double-tilting casting machine Service Training Mechanics RCT2000-2双工位翻转浇铸机机械维修保养培训手册 1) Total design of the machine机器总体设计图 1.1) Main assemblies总体组成 Item Designation部件名称 1 base底座 3 2 rotary unit旋转单元 3 slide unit滑动单元 1 2 1 14-Feb-14 / AEM Wie?mann K.  1) Total design of the machine 1.1) Main assemblies RCT2000-2 Double-tilting casting machine Service Training Mechanics RCT2000-2双工位翻转浇铸机机械维修保养培训手册 1) Total design of the machine机器设计总体图 1.2) Sub-assemblies部件装配 Item Designation部件名称 basic assembly unit base 底座基础装配部件 drive rotary unit (on both sides) 旋转驱动单元（两侧） locking rotary unit (on both sides) 旋转锁紧单元（两侧） 6 energy supply (on both sides) 能源供应（两侧） reference marking (on both sides) 参考位置点（两侧） media channel 液压通道 roller chain lubrication (on both sides) 润滑滚链（两侧） torque support (on both sides) 力矩支撑 8 2 4 3 7 5 1 2 14-Feb-14 / AEM Wie?mann K.  1) Total design of the machine 1.1) Main assemblies RCT2000-2 Double-tilting casting machine Service Training Mechanics RCT2000-2双工位翻转浇铸机机械维修保养培训手册 1) Total design of the machine机器总体设计图 1.3) Rotary unit with covering旋转单元和覆盖部件 Item Designation部件名称 basic assembly unit rotary unit 旋转单元基础装配 centering gravity die 中心重力模具单元 4 lateral cheek left (movable bearing side) 左侧面（可动轴承边） 5 lateral cheek right (fixed bearing side) 右侧面（固定轴承边） covering 保护盖 1 2 3 3 14-Feb-14 / AEM Wie?mann K.  1) Total design of the machine 1.1) Main assemblies RCT2000-2 Double-tilting casting machine Service Training Mechanics RCT2000-2双工位翻转浇铸机机械维修保养培训手册 1) Total design of the machine设备总体设计图 1.4) Slide unit滑块单元 Item Designation部件名称 1 die slide (4 units) 模具滑块（4组） 2 front slide outside (2 units) 外侧前滑块（2组） 3 2 front slide inside (double slide) 内侧前滑块（双滑块） ejector (2 units) 顶出机构（2组） 4 14-Feb-14 / AEM Wie?mann K.  1) Total design of the