张莎莎－铁丝包装机的设计-转滚机构.docVIP

河南科技学院 2009届本科毕业论文（设计） 论文题目：铁丝包装机的设计 -转滚机构 学生姓名：张莎莎 所在院系：机电学院 所学专业：机电技术教育 导师姓名：刘贯军 完成时间：2009年 5 月 25日 铁丝包装机的设计-转滚机构的设计 摘 要 本文设计了铁丝包装机的滚筒部分，包括整个铁丝包装机底座的传动部分和夹紧装置，首先利用变频调速电动机达到滚筒低速转动的要求，再用电动机带动链轮使滚筒转动，使铁丝圈可以转动，与缠绕盘部分相互配合完成包装任务的。本文详细设计了滚筒的传动部分，包括轴、链轮、轴承等部分，配合设计了铁丝圈的夹紧装置，包括丝杠、螺母块、夹紧轴等部分，本设计有结构简单、成本低、实用性强、自动化程度高、市场需求量大等特点。主要应用于机械类加工工厂、包装厂等场合。 关键词：机械设计，滚筒，传动，链轮 PAGE PAGE 3 The design of the iron wire twines the packaging machine The design of platen equipment department Abstract This article has designed the iron wire packaging machine drum part, including the entire iron wire packaging machine foundation transmission part and the clamp, first using the frequency conversion variable speed motor achieved the drum low speed rotation the request, uses electricity the motive impetus chain wheel to cause the drum rotation again, enables the hard bobbin to be possible to rotate, coordinates with the winding plate part to complete the packing task mutually. This article has designed the drum transmission part in detail, including parts and so on axis, chain wheel, bearing, the coordination has designed the hard bobbin clamp, including the guide screw, the nut block, clamps parts and so on mandrel, this design has the structure simply, the cost low, the usability strong, the automaticity high, the market demand big and so on the characteristics. Mainly applies in machinery class situations and so on millwork plant, packing plant. Key words: Machine design, dum, transmission, chain wheel 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc212379416 1. 引言 PAGEREF _Toc212379416 \h 2 HYPERLINK \l _Toc212379417 2. 设计要求 PAGEREF _Toc212379417 \h 2 HYPERLINK \l _Toc212379418 3.总传动部分的设计 PAGEREF _Toc212379418 \h 3 HYPERLINK \l _Toc212379419 3.1总传动方案的拟定 PAGEREF _Toc212379419 \h 3 HYPERLINK \l _Toc212379420 3.2电动机的选择 PAGEREF _Toc212379420 \h 3 HYPERLINK \l _Toc212379421 3.2.1 功率和转速的计算 PAGEREF _Toc212379421 \h 3 HYPERLINK \l _Toc212379422 3.2.2电机的型号选择 PAGEREF _Toc2