仪器制造技术-光整加工-1研讨.ppt

Abrasive Cutting磨料加工 Two-body abrasion refers to a hard rough material sliding against a softer one. The hard surface digs into and removes material from the softer one. Grinding is a two-body abrasion process.磨削定义 Three-body abrasion refers to the introduction of hard particles between two sliding surfaces, at least one of which is softer than the particles. The hard particles abrade material from one or both surfaces. Lapping and polishing are in this category.研磨和抛光定义，二者区别 Lapping（研磨） Lapping is an abrasive process used to produce surface finishes of extreme accuracy and smoothes. Instea