组合机床毕业论文剖析.docVIP

柴油机汽缸盖两端面螺纹底孔加工组合机床设计（右主轴箱设计） 作者姓名：刘 琴 专业名称：机械工程及自动化 指导教师：周丽华 讲师 殷俊文 讲师 摘要 本课题目的是设计加工柴油机汽缸盖的专用组合机床，具体内容包括进行柴油机汽缸盖零件的机械加工工艺设计，利用三维实体设计软件完成两端面螺纹底孔双面钻床设计和主轴箱部件设计。为此，本论文主要围绕上述三个方面的内容进行阐述。其中汽缸盖零件的机械加工工艺设计主要是编制机械加工工序卡；双面钻床总体设计包括被加工零件工序图、加工示意图、机床联系尺寸图和生产率计算卡，即通常所说的“三图一卡”设计；主轴箱部件设计主要包括主轴箱设计原始依据图的绘制、主轴结构形式的选择及动力计算、传动系统的设计与计算等。并且，所有设计图都是先用SolidWorks软件进行三维建模，然后将此三维模型转化为工程图而得到。最终转化为Autocad出图。 关键词：组合机床 双面钻 主轴箱  Abstract This subject purpose is designing and processing making the lathe up special-purposly of the cylinder head of the diesel engine, the concrete content includes carrying on the machining technological design of the cylinder head part of the diesel engine, utilize three-dimensional entity design software finish bolt hole cut two-sided drilling machine design with the case part of the main shaft designing. For this reason, this thesis is explained around the content of above-mentioned three respects mainly. Among them the machining technological design of the part of the cylinder head is mainly to work out the machining process card ; Two-sided drilling machine overall to design including process into part process picture , process sketch map , lathe contact size picture and productivity calculate card, namely three pictures and 1 calorie that usually speak are designed; Main shaft case part is it include main shaft case design primitive drawing , main shaft choice and power calculate , design of transmission and calculate ,etc. structure of form that basis pursue mainly to design. And, all design drawings are to carry on three-dimensional modeling in SolidWorks software first , then transform this three dimensional model to get for project picture. Keywords: combination lathe, two-sided drilling machine , main spindle box 目录 摘要 I Abstract II 目录 III 前言 1 1被加工零件分析 2 1.1主要内容 2 1.2柴油机汽缸盖零件分析 2 1.3零件的加工工艺设计 3 1.4夹紧及定位方式的选择 5 2组合机床总体设计 6 2.1组合机床方案的制定 6 2.2组合机床总体设计 10 2.3加工示意图 11 2.4组合机床总体设计机床联系尺寸图 16 3组合机床主轴箱设计 19 3.1主轴箱的设计步骤和内容 20 3.2主轴结构型式的选择及动力计算 21 3.3主轴箱总图设