十字路口交通灯PLC组态王控制系统教程方案.docxVIP

 PAGE \* MERGEFORMAT 16 十字路口交通灯控制模拟系统 摘要 本文主要介绍了组态软件的基本操作方法和基于组态王与PLC的交通灯控制系统设计方案。工业现场的环境往往比较恶劣，而且现场与操作室往往相隔甚远，但我们通常又需要对整个系统进行集中监控与管理。组态软件是一种面向工业自动化的通用数据采集和监控软件，即SCADA软件，亦称人机界面或HMI/MMI软件，俗称“组态软件”。作为通用的监控软件组态软件都能提供对工业自动化系统进行监视、控制、管理和集成等一系列的功能。同时也为用户实现这些功能的组态过程提供了丰富和易于使用的手段和工具。组态王软件是由北京亚控科技发展有限公司开发的工业级软件,也是首个应用于我国航空、航天领域的国产组态软件,具有开发简单、扩展性好、可靠性高等优点。 关键字：组态王应用、PLC、交通灯、监控  Crossroads traffic light control simulation system ABSTRCT This paper mainly introduces the basic operation of the Kingview software method and based on Kingview and PLC of traffic light control system design scheme. Industrial on-site environmental tend to be bad, the site and operating room are often very far apart, but we usually need to make the whole system centralized monitoring and management.The Kingview software is a kind of industrial automation of a general data collection and monitoring software, namely SCADA software, also called the man-machine interface or HMI/MMI software, commonly known as configuration software. As a general purpose monitoring software ，The Kingview software can provide for industrial automation system a series of function, such as monitoring, control, management and integration and so on. At the same time also for the user to achieve these functions of configuration process provides a rich and easy to use means and tools.The Kingview software is from Beijing and control technology development, development of industrial grade software, is first applied to domestic aviation, spaceflight of domestic configuration software, has the development is simple, good expansibility and high reliability etc. KEY WORDS: PLC、 the apply of KingView;、traffic light、monitoring 交通灯系统需要进行应该进行严格的监控以保证陆空车辆能正常运行，确保交通安全。工业中运用PLC对交通灯进??控制，利用组态程序建立实时监控系统，实现对交通灯系统的集中远程控制。本文将介绍交通灯控制的PLC程序，以组态王的编程步骤来说明监控系统的建立方法。 1 组态相关知识 1.1组态软件概述 “组态”的概念是伴随着集散型控制系（Distributed Control System，简称DCS）的出现才开始被广大的生产过程自动化技术人员所熟知的。 组态的概念最早来自英文Configuration，含义是使用软件工具对计算机及软件的各种资源进行配置，达到使计算机或软件按照预先设置，自动执行特定任务，满足使用